Запомняне

» Здравейте
[ Вход :: Регистриране ]
 » Начало » Li Форуми » Help & Support » X Window & GUI » Slackware 11 и TV OUT
Тема: Slackware 11 и TV OUT
Мнение #1 Skip to the next post in this topic.
Написано на: Март 10 2007, 18:28
alkor

Avatar




Група: Li fans
Мнения: 134
Регистриран: Ноември 2006

Оценка: няма

Offline
Доста се рових и намерих доста работи за различни дистрибуции, но за Slack... не видях нищо, разбирасе можеи да съм пропуснал нещо. Моля да ми помогнете да си пусана TV OUT. От скоро съм с Slackware 11, за това моля покажете ми подробно как става и ако ползвате някакви источници моля Ви да са на български. Видеокартата ми е GeForce 7900 GS използвам този драйвер NVIDIA-Linux-x86-1.0-9755.
                                            Благодаря Ви

-  P C  -
MB-ASUS M2N-E/NF570/s.AM2
CPU-AMD ATHLON 3800+/64bit/x2/s.AM2
V.C.-GeForce 7900GS DDR3 PCI-E 256MB HDTV
RAM-KINGSTON 2x1GB /DDR2/667
Контакти:  alkor
WEB  
Мнение #2 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Март 10 2007, 21:55
nikolavp

Avatar




Група: Li maniacs
Мнения: 560
Регистриран: Юли 2006

Оценка: 4

Offline
Не знам дали работи, защото още не съм взел видео картата, но ето какво съм "сътворил" в резултат на много чете по нетеца по тази тема. Пак предупреждавам не знам дали работи, но ако е така трябва да изведе образа на телевизора и на монитора, които са представени като отделни устройства:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

   Load        "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
   SubSection  "extmod"
     Option    "omit xfree86-dga"   # don't initialise the DGA extension
   EndSubSection

# This loads the font modules
   Load        "type1"
#    Load        "speedo"
   Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
   Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath    "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

   FontPath   "/usr/share/fonts/misc/"
   FontPath   "/usr/share/fonts/corefonts"
#    FontPath   "/usr/share/fonts/TTF/"
#    FontPath   "/usr/share/fonts/OTF"
   FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/CID/"
   FontPath   "/usr/share/fonts/100dpi/"
   FontPath   "/usr/share/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

   Identifier  "Keyboard1"
   Driver      "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

   Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

   Option "XkbRules"   "xorg"
   Option "XkbModel"   "pc101"
   Option "XkbLayout"  "us,bg"
   Option "XkbVariant" ",phonetic"
   Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

   Identifier  "Mouse1"
   Driver      "mouse"
   Option "Protocol"    "ImPS/2"       # PS/2 Mouse
   Option "Device"      "/dev/input/mouse0"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate"        "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
   Option "Buttons" "5"
   Option "ZAxisMapping"   "4 5"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

   Identifier  "IBM P76"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

   HorizSync   31.5 - 82.0

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

   VertRefresh 50-90

EndSection

Section "Monitor"
       Identifier "Samsung"
       HorizSync 30-95
       VertRefresh 60
EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
   Identifier  "Standard VGA"
   VendorName  "Unknown"
   BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

   Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks     25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
   Identifier  "Device[0]"
   Driver      "nvidia"        # unsupported card
   BusID       "PCI:01:00:00"
  # Option "NoLogo" "true"
   Screen 0
   #VideoRam    4096
   # Insert Clocks lines here if appropriate
EndSection
Section "Device"
   Driver      "nvidia"
   Identifier  "Device[1]"
   Option      "TVOutFormat" "Composite"
   Option      "TVStandart" "PAL-G"
   #Option     "TVOutFormat" "SVIDEO"
   Option      "ConnectedMonitor" TV"
   BusID       "PCI:01:00:00"
       # Option "NoLogo" "true
   Screen 1
       #VideoRam    4096
       # Insert Clocks lines here if appropriate
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
   Identifier  "Screen[0]"
   Device      "Device[0]"
   Monitor     "IBM P76"
   DefaultDepth 24

   Subsection "Display"
       Depth       8
       Modes       "1280x1024" "1024x768" "800x600" "640x480"
       ViewPort    0 0
   EndSubsection
   Subsection "Display"
       Depth       16
       Modes       "1280x1024" "1024x768" "800x600" "640x480"
       ViewPort    0 0
   EndSubsection
   Subsection "Display"
       Depth       24
       Modes       "1280x1024" "1024x768" "640x480" "800x600" #"1600x1200"
       ViewPort    0 0
   EndSubsection
EndSection
Section "Screen"
       Device "Device[1]"
       Identifier "Screen[1]"
       Monitor "Samsung"
       DefaultDepth 24
               SubSection "Display"
                       Depth 24
                       Modes "1024x768
               EndSubSection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
   Identifier  "Simple Layout"
   Screen 0 "Screen[0]"
   Screen 1 "Screen[1]" RightOf "Screen[0]"


# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

#Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

   InputDevice "Mouse1" "CorePointer"
   InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

#Section "Extensions"
#       Option "Composite" "Enable"
#EndSection

ЗАБЕЛЕЖКА: Много внимавай с тази деректива
BusID       "PCI:01:00:00"
има в Section Device трябва да сочи точния адрес на твойта карта виж го посредством lspci.Поздрави!!

Контакти:  nikolavp

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #3 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Март 11 2007, 21:15
alkor

Avatar




Група: Li fans
Мнения: 134
Регистриран: Ноември 2006

Оценка: няма

Offline
:29;  Ще го пробвам и ще побликувам отговора тук  :43; Някой ако има някакви други идеи да ги сподели. Благодаря.

Редактирано от alkor на Март 11 2007, 21:17

-  P C  -
MB-ASUS M2N-E/NF570/s.AM2
CPU-AMD ATHLON 3800+/64bit/x2/s.AM2
V.C.-GeForce 7900GS DDR3 PCI-E 256MB HDTV
RAM-KINGSTON 2x1GB /DDR2/667
Контакти:  alkor
WEB  
Мнение #4 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Март 12 2007, 22:02
kamos

No avatar chosen




Група: Li fans
Мнения: 60
Регистриран: Август 2005

Оценка: няма

Offline
Само внимавай като пишеш честотите на монитора - вертикалната и хоризонталната да не си изпържеш монитора
Контакти:  kamos
WEB  
Мнение #5
Skip to the previous post in this topic. Написано на: Март 30 2007, 12:37
alkor

Avatar




Група: Li fans
Мнения: 134
Регистриран: Ноември 2006

Оценка: няма

Offline
Не се получава при мен, как ли не конфигурирах xorg.conf фаила.  :6; Ефекта бе катастрофален по едно време отказа да зарежда Х.  :29;  Пробвах да го кофигорирам по начина даден тук http://georgi.unixsol.org/diary/archive.php/2006-01-18 но ефекта бе същия. Май не правя нещо както трябва но не знам какво.    :14;

-  P C  -
MB-ASUS M2N-E/NF570/s.AM2
CPU-AMD ATHLON 3800+/64bit/x2/s.AM2
V.C.-GeForce 7900GS DDR3 PCI-E 256MB HDTV
RAM-KINGSTON 2x1GB /DDR2/667
Контакти:  alkor
WEB  
Общо 4 отговор(а) от Март 10 2007, 18:28 до сега
 » Начало » Li Форуми » Help & Support » X Window & GUI » Slackware 11 и TV OUT

© 2014 Linux Index Project
Powered by iF 1.0.0 © 2006 ikonForums