# fdisk -l
# cat /мястото/кадето/е/монтиран/дяла/boot/grub/menu.lst

Bootting "Debian 2.6.15......."

root (hd0,1)
FIlesystem type is ext2fs , partition type 0x83
kernel /boot/......................... root=/dev........................ ro
[Linux-bzImage ,setup=0x1e00,size0.1210,5]
initrd /boot/..............

[Linux -initrd @0x1fb79000 , 0x466117 bytes]
savedefault

Error 25;Disk read error

Press any key to continue...

tva e(kudetopisha "............." seshtash se tva e path)

root (hd0,1)
kernel ......................... root=.................. ro
initrd /......................./
save default
boot

Bootin "MS XP"
root(hd0,0)
Filesystem type unknwn,partition type 0x7
save default

Error 25;Disk read error

Press any key to continue...

root (hd0,0)
savedefault
makeactive
chainloader +1

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 15

# Pretty colours
color red/black white/black

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub ###### except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hdc2 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,1)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery mode) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## ## End Default Options ##

title Debian 2.6.15-1-486 yasnv
root (hd0,1)
kernel /boot/vmlinuz-2.6.15-1-486 root=/dev/hdc2 ro
initrd /boot/initrd.img-2.6.15-1-486
savedefault
boot

title Debian 2.6.15-1-486 (recovery mode)
root (hd0,1)
kernel /boot/vmlinuz-2.6.15-1-486 root=/dev/hdc2 ro single
initrd /boot/initrd.img-2.6.15-1-486
savedefault
boot

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hdc1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1

Disk /dev/hdc: 122.9 GB, 122942324736 bytes
255 heads, 63 sectors/track, 14946 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start         End      Blocks   Id  System
/dev/hdc1   *           1       13642   109579333+   7  HPFS/NTFS
/dev/hdc2           13643       14888    10008495   83  Linux
/dev/hdc3           14889       14946      465885    5  Extended
/dev/hdc5           14889       14946      465853+  82  Linux swap / Solaris

root@0[knoppix]# fsck /mnt/hdc2
fsck 1.38-WIP (09-May-2005)
e2fsck 1.38-WIP (09-May-2005)
/dev/hdc2 is mounted.

WARNING!!!  Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.

Do you really want to continue (y/n)? no

check aborted.

root@0[knoppix]# umount /mnt/hdc2
root@0[knoppix]# fsck /mnt/hdc2
fsck 1.38-WIP (09-May-2005)
e2fsck 1.38-WIP (09-May-2005)
/: clean, 89679/1251712 files, 853642/2502123 blocks