Запомняне

» Здравейте
[ Вход :: Регистриране ]
Тема: k3bsetup, Debian testing
Мнение #1 Skip to the next post in this topic.
Написано на: Юни 13 2006, 18:17
MarineForce

Avatar




Група: Li fans
Мнения: 92
Регистриран: Април 2006

Оценка: няма

Offline
Здравейте. От околко седмица съм с Дебиан, но вчера ми трябваше да запиша едно CD и се сещам, че не съм инсталирал k3b, инсталирам го и след като се опитам с k3btsetup, се получава грешка и не мога да си настроя k3b-то, искаше се да се инсталират kdelibs, инстлаирах ги, но пак същатата работа, ако ми помогнете ще съм ви благодарен ....


NY:/home/vanka# k3bsetup
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
kbuildsycoca running...
kcmshell (kdelibs): WARNING: Could not find module 'k3bsetup2'.


Редактирано от MarineForce на Юни 13 2006, 18:17

Контакти:  MarineForce
WEB  
Мнение #2 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Юни 13 2006, 18:53

Avatar


Warn 3

Група: Li fans
Мнения: 384
Регистриран: Април 2006

Оценка: няма

Offline
Копилирай го от сорс. Има проблем с последната версия на к3б, но можеш и да пробваш gnomebaker ;) .... а може и в конзола (growisofs за DVD и cdrecord за CD  :22; )

red@debian:~$ sudo apt-build world
-----> Rebuilding the world! <-----
-----> Building package list <-----
Please read README.Debian first.
red@debian:~$
Контакти:  Red

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #3 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Юни 13 2006, 20:38
MarineForce

Avatar




Група: Li fans
Мнения: 92
Регистриран: Април 2006

Оценка: няма

Offline
Не ми се е налагало да компилирам от сорс, та се получи някаква грешка  :14; . Ако може малко помощ ;)...


Цитат:

NY:/home/vanka/k3b-0.12.15# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for kde-config... /usr/bin/kde-config
checking where to install... /usr (as returned by kde-config)
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether gcc is blacklisted... no
checking whether g++ supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wno-non-virtual-dtor... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fno-common... yes
checking whether g++ supports -fexceptions... yes
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -O0... yes
checking whether g++ supports -Wl,--no-undefined... yes
checking whether g++ supports -Wl,--allow-shlib-undefined... yes
not using lib directory suffix
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... (cached) yes
appending configuration tag "F77" to libtool
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking if C++ programs can be compiled... yes
checking for strlcat... no
checking if strlcat needs custom prototype... yes - in libkdefakes
checking for strlcpy... no
checking if strlcpy needs custom prototype... yes - in libkdefakes
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... yes
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/bitypes.h usability... yes
checking sys/bitypes.h presence... yes
checking for sys/bitypes.h... yes
checking for poll in -lpoll... no
checking Carbon/Carbon.h usability... no
checking Carbon/Carbon.h presence... no
checking for Carbon/Carbon.h... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking for res_init... yes
checking if res_init needs custom prototype... no
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for short... yes
checking size of short... 2
checking for long... yes
checking size of long... 4
checking for char *... yes
checking size of char *... 4
checking for dlopen in -ldl... (cached) yes
checking for shl_unload in -ldld... no
checking for size_t... yes
checking size of size_t... 4
checking for unsigned long... yes
checking size of unsigned long... 4
checking sizeof size_t == sizeof unsigned long... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... configure: error: Can't find X includes. Please check your ins tallation and add the correct paths!

Контакти:  MarineForce
WEB  
Мнение #4 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Юни 13 2006, 21:08
phantomlord
Phantom Lord
Avatar




Група: Li maniacs
Мнения: 665
Регистриран: Август 2005

Оценка: няма

Offline
Дай:
Код: 
apt-get install kdebase-dev

и после пак:
Код: 
./configure

Когато го инсталираш, си създай група burning, направи потребителя си неин член и настрой k3bsetup така.

Debian lenny/sid, 2.6.24-phantomlord, KDE 3.5.9
http://myfreesoft.net/phpBB2/index.php?c=7
The knowledge is to be shared...
Помогни си сам, за да ти помогне и Господ
Контакти:  phantomlord

  • AOL  AOL:
  • ICQ  ICQ: 322393169
  • MSN  MSN:
  • YIM  Yahoo IM:
Мнение #5 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Юни 13 2006, 21:16
MarineForce

Avatar




Група: Li fans
Мнения: 92
Регистриран: Април 2006

Оценка: няма

Offline
Да не стане някой фал .... :Т

Цитат:

NY:/home/vanka# apt-get install kdebase-dev
Reading package lists... Done
Building dependency tree... Done
The following extra packages will be installed:
 comerr-dev enscript fontconfig-config gnome-applets-data hspell kate
 kcontrol kdebase-bin kdebase-data kdebase-kio-plugins kdelibs4-dev kdeprint
 kdesktop kfind khelpcenter kicker klipper kmenuedit konqueror
 konqueror-nsplugins konsole ksmserver ksplash ksysguard ksysguardd kwin
 libacl1-dev libart-2.0-dev libarts1-dev libarts1c2a libartsc0 libartsc0-dev
 libasound2 libasound2-dev libaspell-dev libattr1-dev libaudio-dev
 libaudiofile-dev libavahi-client-dev libavahi-common-dev
 libavahi-compat-libdnssd1 libavahi-qt3-dev libbz2-dev libcupsys2-dev
 libdbus-1-dev libesd0-dev libexpat1-dev libfam-dev libfam0 libfontconfig1
 libfontconfig1-dev libfreetype6-dev libgcrypt11-dev libgl1-mesa-dev
 libgl1-mesa-dri libgl1-mesa-glx libglib2.0-0 libglib2.0-dev libglu1-mesa
 libglu1-mesa-dev libgnutls-dev libgpg-error-dev libice-dev libice6
 libidn11-dev libjack0.100.0-dev libjasper-1.701-dev libjpeg62-dev libkadm55
 libkonq4 libkrb5-dev liblcms1-dev liblua50-dev liblualib50-dev liblzo-dev
 libmad0-dev libmng-dev libogg-dev libopencdk8-dev libopenexr-dev
 libopenexr2c2a libpaper-utils libpaper1 libpcre3-dev libpcrecpp0
 libpng12-dev libpopt-dev libpopt0 libqt3-headers libqt3-mt-dev libsasl2-dev
 libsasl2-modules libsensors3 libsm-dev libssl-dev libtasn1-2-dev libtiff4
 libtiff4-dev libtiffxx0c2 libvorbis-dev libx11-dev libxau-dev libxcomposite1
 libxcursor-dev libxdmcp-dev libxext-dev libxfixes-dev libxft-dev libxft2
 libxi-dev libxinerama-dev libxml2 libxml2-dev libxmu-dev libxmu-headers
 libxrandr-dev libxrender-dev libxslt1-dev libxslt1.1 libxt-dev lua50
 mesa-common-dev pkg-config poster psutils qt3-dev-tools x11proto-core-dev
 x11proto-fixes-dev x11proto-input-dev x11proto-kb-dev x11proto-randr-dev
 x11proto-render-dev x11proto-xext-dev x11proto-xinerama-dev xtrans-dev
 zlib1g-dev
Suggested packages:
 doc-base gv postscript-viewer aspell kate-plugins konq-speaker ntpdate
 ntp-simple efax hylafax-client mgetty-fax kicker-applets konq-plugins ksvg
 libgcj7-awt kpager libasound2-plugins libasound2-doc aspell-doc
 libgcrypt11-doc libglib2.0-doc libgnutls-doc gnutls-bin krb5-doc libqt3-i18n
 qt3-doc lm-sensors lm-sensors-mod-2.9 kernel-image-2.6 libgnome-dev
Recommended packages:
 kregexpeditor kamera kdemultimedia-kio-plugins kghostview xfonts-konsole
 kpersonalizer libarts1-akode fam libglib2.0-data libqt3-compat-headers
 gs-gpl gs
The following packages will be REMOVED
 gamin gnome-applets gnome-core gnome-desktop-environment gnome-panel
 libgamin0 update-notifier
The following NEW packages will be installed
 comerr-dev enscript hspell kate kcontrol kdebase-data kdebase-dev
 kdebase-kio-plugins kdelibs4-dev kdeprint kdesktop kfind khelpcenter kicker
 klipper kmenuedit konqueror konqueror-nsplugins konsole ksmserver ksplash
 ksysguard ksysguardd kwin libacl1-dev libart-2.0-dev libarts1-dev
 libartsc0-dev libasound2-dev libaspell-dev libattr1-dev libaudio-dev
 libaudiofile-dev libavahi-client-dev libavahi-common-dev
 libavahi-compat-libdnssd1 libavahi-qt3-dev libbz2-dev libcupsys2-dev
 libdbus-1-dev libesd0-dev libexpat1-dev libfam-dev libfam0
 libfontconfig1-dev libfreetype6-dev libgcrypt11-dev libgl1-mesa-dev
 libgl1-mesa-dri libglib2.0-dev libglu1-mesa-dev libgnutls-dev
 libgpg-error-dev libice-dev libidn11-dev libjack0.100.0-dev
 libjasper-1.701-dev libjpeg62-dev libkadm55 libkonq4 libkrb5-dev
 liblcms1-dev liblua50-dev liblualib50-dev liblzo-dev libmad0-dev libmng-dev
 libogg-dev libopencdk8-dev libopenexr-dev libpaper-utils libpaper1
 libpcre3-dev libpcrecpp0 libpng12-dev libpopt-dev libqt3-headers
 libqt3-mt-dev libsasl2-dev libsasl2-modules libsensors3 libsm-dev libssl-dev
 libtasn1-2-dev libtiff4-dev libtiffxx0c2 libvorbis-dev libx11-dev libxau-dev
 libxcomposite1 libxcursor-dev libxdmcp-dev libxext-dev libxfixes-dev
 libxft-dev libxi-dev libxinerama-dev libxml2-dev libxmu-dev libxmu-headers
 libxrandr-dev libxrender-dev libxslt1-dev libxt-dev lua50 mesa-common-dev
 pkg-config poster psutils qt3-dev-tools x11proto-core-dev x11proto-fixes-dev
 x11proto-input-dev x11proto-kb-dev x11proto-randr-dev x11proto-render-dev
 x11proto-xext-dev x11proto-xinerama-dev xtrans-dev zlib1g-dev
The following packages will be upgraded:
 fontconfig-config gnome-applets-data kdebase-bin libarts1c2a libartsc0
 libasound2 libfontconfig1 libgl1-mesa-glx libglib2.0-0 libglu1-mesa libice6
 libopenexr2c2a libpopt0 libtiff4 libxft2 libxml2 libxslt1.1
17 upgraded, 120 newly installed, 7 to remove and 208 not upgraded.
Need to get 76.2MB of archives.
After unpacking 177MB of additional disk space will be used.
Do you want to continue [Y/n]? n
Abort.

Контакти:  MarineForce
WEB  
Мнение #6 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Юни 13 2006, 21:20

Avatar


Warn 3

Група: Li fans
Мнения: 384
Регистриран: Април 2006

Оценка: няма

Offline
Няма да се плашиш ..... така смело ще си махнеш gnome-а ;)
Я пробвай нещо друго
Код: 

apt-get install kdelibs-dev

и пробвай пак с ./configure, а ако пак не стане, мисля, че ще ти трябва dev пакети за X-a ..... май беше x-window-system-dev, но не съм сигурен и нямам линукс пред себе си ;)
Успех

red@debian:~$ sudo apt-build world
-----> Rebuilding the world! <-----
-----> Building package list <-----
Please read README.Debian first.
red@debian:~$
Контакти:  Red

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #7 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Юни 13 2006, 21:31
MarineForce

Avatar




Група: Li fans
Мнения: 92
Регистриран: Април 2006

Оценка: няма

Offline
Цитат:

NY:/home/vanka# apt-get install kdelibs-dev
Reading package lists... Done
Building dependency tree... Done
Package kdelibs-dev is a virtual package provided by:
 kdelibs4-dev 4:3.5.3-1
You should explicitly select one to install.
E: Package kdelibs-dev has no installation candidate


дам..... :Т

Контакти:  MarineForce
WEB  
Мнение #8 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Юни 13 2006, 21:39
MarineForce

Avatar




Група: Li fans
Мнения: 92
Регистриран: Април 2006

Оценка: няма

Offline
phantomlord, а кои са нужните пакети да инсталирам KDE (ама без да махам Gnome ;) ), за да нямам ядове с тва k3b ;)..?

Редактирано от MarineForce на Юни 13 2006, 21:46

Контакти:  MarineForce
WEB  
Мнение #9
Skip to the previous post in this topic. Написано на: Юни 13 2006, 22:27
phantomlord
Phantom Lord
Avatar




Група: Li maniacs
Мнения: 665
Регистриран: Август 2005

Оценка: няма

Offline
Активни ли са ти unstable хранилищата? Ако да, ги коментрай, после дай apt-get update и пак се опитай да инсталираш kdebase-dev. Предполагам, че има проблем в зависимостите при unstable.

Debian lenny/sid, 2.6.24-phantomlord, KDE 3.5.9
http://myfreesoft.net/phpBB2/index.php?c=7
The knowledge is to be shared...
Помогни си сам, за да ти помогне и Господ
Контакти:  phantomlord

  • AOL  AOL:
  • ICQ  ICQ: 322393169
  • MSN  MSN:
  • YIM  Yahoo IM:
Общо 8 отговор(а) от Юни 13 2006, 18:17 до сега

© 2014 Linux Index Project
Powered by iF 1.0.0 © 2006 ikonForums