Запомняне

» Здравейте
[ Вход :: Регистриране ]
 » Начало » Li Форуми » Help & Support » Applications » Update grub-как става
Тема: Update grub-как става
Мнение #1 Skip to the next post in this topic.
Написано на: Август 05 2007, 12:15
aladin

No avatar chosen




Група: Li fans
Мнения: 38
Регистриран: Февруари 2006

Оценка: няма

Offline
Код: 
aladin@aladin-desktop:~$ sudo fdisk -l

Disk /dev/sda: 300.0 GB, 300069052416 bytes
255 heads, 63 sectors/track, 36481 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        2550    20482843+   c  W95 FAT32 (LBA)
/dev/sda2            2551       36481   272550757+   f  W95 Ext'd (LBA)
/dev/sda5            2551       36481   272550726    7  HPFS/NTFS

Disk /dev/hda: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        1275    10241406    c  W95 FAT32 (LBA)
/dev/hda2            1276       10011    70171920    5  Extended
/dev/hda5            1276        3354    16699536   83  Linux
/dev/hda6            3355        5313    15735636   83  Linux
/dev/hda7            5314       10011    37736653+   7  HPFS/NTFS


/dev/hda1   е ХР
/dev/hda5 ми е Кубунту
/dev/hda6 е Sabayon ,но GRUB-а захапва само Кубунтото и ХР.

Код: 
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub ###### except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=f7654099-e6c1-4649-8fbb-a6e4f30396a5 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=bg_BG

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title Ubuntu, kernel 2.6.20-15-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=f7654099-e6c1-4649-8fbb-a6e4f30396a5 ro quiet splash locale=bg_BG
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=f7654099-e6c1-4649-8fbb-a6e4f30396a5 ro single
initrd /boot/initrd.img-2.6.20-15-generic

title Ubuntu, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1

Идея какво да направя!

Код: 
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/hda5
UUID=f7654099-e6c1-4649-8fbb-a6e4f30396a5 /               ext3    defaults,errors=remount-ro 0       1
# /dev/hda1
UUID=F849-30DF  /media/hda1     vfat    defaults,utf8,umask=007,gid=46 0       1
# /dev/hda6
UUID=07f78a04-4075-499f-8a6a-0c0e7bdca4eb /media/hda6     ext3    defaults        0       2
# /dev/hda7
UUID=0F9ECFD1003FF76A /media/hda7     ntfs    defaults,nls=utf8,umask=007,gid=46 0       1
# /dev/sda1
UUID=4638-E9AD  /media/sda1     vfat    defaults,utf8,umask=007,gid=46 0       1
# /dev/sda5
UUID=660082D90082B01B /media/sda5     ntfs    defaults,nls=utf8,umask=007,gid=46 0       1
/dev/hdc        /media/cdrom0   udf,iso9660 user,noauto     0       0


Редактирано от aladin на Август 05 2007, 12:36
Контакти:  aladin
WEB  
Мнение #2 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Август 06 2007, 09:37
mcwolf

No avatar chosen




Група: Li gurus
Мнения: 1489
Регистриран: Април 2005

Оценка: 5

Offline
бе ти тива не го ли оправи вече ?

Цитат:

title Sabayon Linux x86 3.4
root (hd0,5)
kernel /boot/kernel-genkernel-x86-2.6.22-sabayon  root=/dev/ram0 ramdisk=8192 real_root=UUID=07f78a04-4075-499f-8a6a-0c0e7bdca4eb
initrd /boot/initramfs-genkernel-x86-2.6.22-sabayon


това го сложи преди черчавето но гледай да не е над
Цитат:

title Other operating systems:
root


и провери да не съм объркал uuid-то на дялът
Контакти:  mcwolf

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #3 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Август 06 2007, 15:38
aladin

No avatar chosen




Група: Li fans
Мнения: 38
Регистриран: Февруари 2006

Оценка: няма

Offline
Код: 
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub ###### except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=dfe8265b-7083-4419-a8c8-5eed4656a186 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,5)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=bg_BG

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title Ubuntu, kernel 2.6.20-15-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=dfe8265b-7083-4419-a8c8-5eed4656a186 ro quiet splash locale=bg_BG
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=dfe8265b-7083-4419-a8c8-5eed4656a186 ro single
initrd /boot/initrd.img-2.6.20-15-generic

title Ubuntu, memtest86+
root (hd0,5)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/hda5.
title Sabayon Linux x86 3.4 (on /dev/hda5)
root (hd0,4)
kernel /boot/kernel-genkernel-x86-2.6.22-sabayon root=/dev/ram0 ramdisk=8192 real_root=UUID=49d3ad4a-733c-4177-acd0-fa0ff78269b0 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1 dodmraid pci=nomsi
initrd /boot/initramfs-genkernel-x86-2.6.22-sabayon
savedefault
boot


title Sabayon Linux x86 3.4
root (hd0,5)
kernel /boot/kernel-genkernel-x86-2.6.22-sabayon  root=/dev/ram0 ramdisk=8192 real_root=UUID=07f78a04-4075-499f-8a6a-0c0e7bdca4eb
initrd /boot/initramfs-genkernel-x86-2.6.22-sabayon - това е за сравнение,да видим да ли си уцелил :)

така бачка вече


Редактирано от aladin на Август 06 2007, 15:41
Контакти:  aladin
WEB  
Мнение #4
Skip to the previous post in this topic. Написано на: Август 07 2007, 10:16
mcwolf

No avatar chosen




Група: Li gurus
Мнения: 1489
Регистриран: Април 2005

Оценка: 5

Offline
Цитат:  (mcwolf @ Август 06 2007,09:37)

бе ти тива не го ли оправи вече ?

Цитат:

title Sabayon Linux x86 3.4
root (hd0,5)
kernel /boot/kernel-genkernel-x86-2.6.22-sabayon  root=/dev/ram0 ramdisk=8192 real_root=UUID=07f78a04-4075-499f-8a6a-0c0e7bdca4eb
initrd /boot/initramfs-genkernel-x86-2.6.22-sabayon


това го сложи преди черчавето но гледай да не е над
Цитат:

title Other operating systems:
root


и провери да не съм объркал uuid-то на дялът

е уцелил ли съм :)

м/у другото не съм се и опитвал да нацелвам - това е извадка от конфигурацията на грубът ти докато ползваше Sabayon-а (от темата в дата-та :) ) - само смених uuid-то с това от fstab-ът горе
Контакти:  mcwolf

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Общо 3 отговор(а) от Август 05 2007, 12:15 до сега
 » Начало » Li Форуми » Help & Support » Applications » Update grub-как става

© 2014 Linux Index Project
Powered by iF 1.0.0 © 2006 ikonForums