Запомняне

» Здравейте
[ Вход :: Регистриране ]
 » Начало » Li Форуми » Help & Support » Kernels & Drivers » Проблем при инстал на драйвъри за Radeon A9250
Тема: Проблем при инстал на драйвъри за Radeon A9250, X-server грешка...
Мнение #1 Skip to the next post in this topic.
Написано на: Май 11 2008, 18:47

Avatar




Група: Li fans
Мнения: 58
Регистриран: Май 2008

Оценка: няма

Offline
Значи аз съм леко новак и бих бил доста благодарен на този който ми помогне.

На Linux Ubuntu 8.04 съм.

Проблемът е следния:

Аз съм със видео карта Radeon A9250 свалям драйвъра за тази модел видео карто от сайта на ATI и при стартиране на ati-driver-installer-8.28.82.run файла за инсталиране получавам тази грешка:

Code Sample: 
venelin@venelin-desktop:~/Плот$ sh ./ati-driver-installer-8.28.82.run
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.28.8.............................................................................


..........................................................................................


..........................................................................................


..........................................................................................


..........................................................................................


................................
-e ==================================================
-e  ATI Technologies Linux Driver Installer/Packager
-e ==================================================
Detected configuration:
Architecture: i686 (32-bit)
X Server: unable to detect
Removing temporary directory: fglrx-install
venelin@venelin-desktop:~/Плот$


До колкото схващам грешката се изписва тук:

Code Sample: 
X Server: unable to detect


От къде и как да се оправя с този X-server.

Редактирано от Lizzarda на Май 11 2008, 18:50
Контакти:  Lizzarda

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #2 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Май 11 2008, 19:11

No avatar chosen




Група: Li maniacs
Мнения: 153
Регистриран: Февруари 2007

Оценка: няма

Offline
Можеш ли да покажеш какво ти дават тези команди:
lspci | grep VGA
glxinfo | grep "direct rendering"

Мисля, че картите на ATI не поддържат драйвера fglrx, ако не са от серия над 9500 (или над 9700) -> INFO1, INFO2.
Може би ще ти се наложи да използваш драйвера с отворен код: https://help.ubuntu.com/community/RadeonDriver
Специално за номера на твоята карта ми се струва, че се отнася и тази информация за прекомпилиране на драйвера (макар че там са споменати по - стари версии на Убунту):
https://help.ubuntu.com/community/Radeon_9200/9250_%28RV280%29_and_DVI

Редактирано от cdiem на Май 11 2008, 19:15
Контакти:  cdiem

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #3 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Май 11 2008, 20:14

Avatar




Група: Li fans
Мнения: 58
Регистриран: Май 2008

Оценка: няма

Offline
Quote: (cdiem @ May 11 2008, 19:11)

Можеш ли да покажеш какво ти дават тези команди:
lspci | grep VGA
glxinfo | grep "direct rendering"

Мисля, че картите на ATI не поддържат драйвера fglrx, ако не са от серия над 9500 (или над 9700) -> INFO1, INFO2.
Може би ще ти се наложи да използваш драйвера с отворен код: https://help.ubuntu.com/community/RadeonDriver
Специално за номера на твоята карта ми се струва, че се отнася и тази информация за прекомпилиране на драйвера (макар че там са споменати по - стари версии на Убунту):
https://help.ubuntu.com/community/Radeon_9200/9250_%28RV280%29_and_DVI

Когато напиша:

Quote: 

lspci | grep VGA


ми дава това:

Code Sample: 
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)


Когато напиша:

Quote: 

glxinfo | grep "direct rendering"


ми дава това:

Code Sample: 
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)


Моляте кажи ми стъпка по стъпка, какво да правя и ще съм ти наиситна благодарен.
Контакти:  Lizzarda

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #4 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Май 11 2008, 22:19

No avatar chosen




Група: Li maniacs
Мнения: 153
Регистриран: Февруари 2007

Оценка: няма

Offline
Преди да направиш друго, използвай "Restricted Driver Manager", така че "ATI accelerated graphics driver" да не се използва (махни чавката). След това направи: glxinfo | grep "direct rendering"
Ако ти даде "direct rendering" Yes, си готов. Ако не, продължаваме.

Можеш да опиташ и с envy, би трябвало автоматично да инсталира и конфигурира fglrx драйвъра за твоята карта - на теория.
Код: 
sudo apt-get install envyng-core
gksudo envy -g

Следваш инструкциите, след което пак проверяваш за glxinfo | grep "direct rendering".

Ако това не помогне, можеш ли да дадеш съдържанието на
Код: 
dmesg
gksu gedit /etc/X11/xorg.conf
glxinfo


P.S.
Драйверът fglrx, от версия 8.29, официално не поддържа твоята карта (Link). В Убунту Edgy (6.10) е последният прекомпилиран драйвър версия 8.28 -> http://packages.ubuntu.com/edgy/i386/xorg-driver-fglrx/download .
Добрите новини са, че ако наистина искаш да инсталираш този драйвър, си свалил правилна версия. Драйвърът обаче е остарял на повече от година, и ще се опитаме да го инсталираме само в краен случай (с коригиране на /etc/X11/xorg.conf, като в раздела Section "Device" се сменя "ati" с "fglrx" след инсталацията). Засега е по - добре да не правиш нищо от описаното.

P.P.S. Можеш ли да обясниш по - точно какъв беше проблема - нещо с tvout, 3D приложенията вървят бавно, или нещо друго?

Редактирано от cdiem на Май 11 2008, 22:35
Контакти:  cdiem

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #5 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Май 11 2008, 23:08

No avatar chosen




Група: Li fans
Мнения: 7
Регистриран: Май 2008

Оценка: няма

Offline
Здравейте и аз съм новак със същия проблем.Не мога да подкарам TVOUT ,а glxinfo | grep "direct rendering" ми дава YES.Какво да направя от тук нататък и как да инсталирам драйвера ati-driver-installer.8.28.8.run? с апт-гет не става със sh също.Кажете какво да направя? :60;
Контакти:  pifivo

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #6 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Май 12 2008, 00:54

Avatar




Група: Li fans
Мнения: 58
Регистриран: Май 2008

Оценка: няма

Offline
Quote: (cdiem @ May 11 2008, 22:19)

Преди да направиш друго, използвай "Restricted Driver Manager", така че "ATI accelerated graphics driver" да не се използва (махни чавката). След това направи: glxinfo | grep "direct rendering"
Ако ти даде "direct rendering" Yes, си готов. Ако не, продължаваме.

Можеш да опиташ и с envy, би трябвало автоматично да инсталира и конфигурира fglrx драйвъра за твоята карта - на теория.
Code Sample: 
sudo apt-get install envyng-core
gksudo envy -g

Следваш инструкциите, след което пак проверяваш за glxinfo | grep "direct rendering".

Ако това не помогне, можеш ли да дадеш съдържанието на
Code Sample: 
dmesg
gksu gedit /etc/X11/xorg.conf
glxinfo


P.S.
Драйверът fglrx, от версия 8.29, официално не поддържа твоята карта (Link). В Убунту Edgy (6.10) е последният прекомпилиран драйвър версия 8.28 -> http://packages.ubuntu.com/edgy/i386/xorg-driver-fglrx/download .
Добрите новини са, че ако наистина искаш да инсталираш този драйвър, си свалил правилна версия. Драйвърът обаче е остарял на повече от година, и ще се опитаме да го инсталираме само в краен случай (с коригиране на /etc/X11/xorg.conf, като в раздела Section "Device" се сменя "ati" с "fglrx" след инсталацията). Засега е по - добре да не правиш нищо от описаното.

P.P.S. Можеш ли да обясниш по - точно какъв беше проблема - нещо с tvout, 3D приложенията вървят бавно, или нещо друго?

Sorry, но никъде не открих Restricted Driver Manager... моляте помогни да го подкарам това нещо направо ме изкарва извън нерви.
Контакти:  Lizzarda

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #7 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Май 12 2008, 02:02

No avatar chosen




Група: Li fans
Мнения: 7
Регистриран: Май 2008

Оценка: няма

Offline
При мен нещо се сбъгяса работата, та възстанових от предния xorg.conf - предварително записан, че резолюцията беше малка и не можеше да се променя.
Ето отчета от написаните по-горе команди:

[    0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
[    0.000000]  BIOS-e820: 000000004fff0000 - 000000004fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000004fff3000 - 0000000050000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 383MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5c80
[    0.000000] Entering add_active_range(0, 0, 327664) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   327664
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   327664
[    0.000000] On node 0 totalpages: 327664
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 767 pages used for memmap
[    0.000000]   HighMem zone: 97521 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F75E0 checksum 0
[    0.000000] ACPI: RSDP 000F75E0, 0014 (r0 AWARD )
[    0.000000] ACPI: RSDT 4FFF3000, 002C (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 4FFF3040, 0074 (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 4FFF30C0, 37E3 (r1 AWARD  AWRDACPI     1000 MSFT  100000D)
[    0.000000] ACPI: FACS 4FFF0000, 0040
[    0.000000] ACPI: APIC 4FFF68C0, 0068 (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 325105
[    0.000000] Kernel command line: root=UUID=10757be7-0c5a-48c1-a09d-b1891f277fc4 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2410.312 MHz processor.
[   11.206081] Console: colour VGA+ 80x25
[   11.206087] console [tty0] enabled
[   11.206538] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   11.207247] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   11.274902] Memory: 1286576k/1310656k available (2157k kernel code, 22860k reserved, 998k data, 364k init, 393152k highmem)
[   11.274912] virtual kernel memory layout:
[   11.274913]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   11.274914]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   11.274916]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   11.274917]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   11.274918]       .init : 0xc041b000 - 0xc0476000   ( 364 kB)
[   11.274919]       .data : 0xc031b5a4 - 0xc0414dc4   ( 998 kB)
[   11.274920]       .text : 0xc0100000 - 0xc031b5a4   (2157 kB)
[   11.274924] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   11.274981] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   11.354848] Calibrating delay using timer specific routine.. 4824.58 BogoMIPS (lpj=9649177)
[   11.354886] Security Framework initialized
[   11.354894] SELinux:  Disabled at boot.
[   11.354913] AppArmor: AppArmor initialized
[   11.354919] Failure registering capabilities with primary security module.
[   11.354932] Mount-cache hash table entries: 512
[   11.355130] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[   11.355149] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   11.355152] CPU: L2 cache: 128K
[   11.355156] CPU: Hyper-Threading is disabled
[   11.355159] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[   11.355174] Compat vDSO mapped to ffffe000.
[   11.355191] Checking 'hlt' instruction... OK.
[   11.371247] SMP alternatives: switching to UP code
[   11.373062] Freeing SMP alternatives: 11k freed
[   11.373224] Early unpacking initramfs... done
[   11.770177] ACPI: Core revision 20070126
[   11.770239] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   11.773378] CPU0: Intel® Celeron® CPU 2.00GHz stepping 09
[   11.773427] Total of 1 processors activated (4824.58 BogoMIPS).
[   11.773531] ENABLING IO-APIC IRQs
[   11.773706] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   11.917843] Brought up 1 CPUs
[   11.917870] CPU0 attaching sched-domain:
[   11.917874]  domain 0: span 01
[   11.917876]   groups: 01
[   11.918228] net_namespace: 64 bytes
[   11.918238] Booting paravirtualized kernel on bare hardware
[   11.919090] Time:  1:30:43  Date: 05/12/08
[   11.919136] NET: Registered protocol family 16
[   11.919753] EISA bus registered
[   11.919792] ACPI: bus type pci registered
[   11.931540] PCI: PCI BIOS revision 2.10 entry at 0xfb920, last bus=1
[   11.931544] PCI: Using configuration type 1
[   11.931546] Setting up standard PCI resources
[   11.935108] ACPI: EC: Look up EC in DSDT
[   11.938952] ACPI: Interpreter enabled
[   11.938959] ACPI: (supports S0 S1 S4 S5)
[   11.938983] ACPI: Using IOAPIC for interrupt routing
[   11.947854] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   11.948153] Enabling SiS 96x SMBus.
[   11.948956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   11.963729] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[   11.963885] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[   11.964033] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[   11.964195] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[   11.964344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[   11.964489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[   11.964629] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[   11.964774] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 14 15)
[   11.965095] Linux Plug and Play Support v0.97 © Adam Belay
[   11.965193] pnp: PnP ACPI init
[   11.965209] ACPI: bus type pnp registered
[   11.969613] pnp: PnP ACPI: found 12 devices
[   11.969620] ACPI: ACPI bus type pnp unregistered
[   11.969625] PnPBIOS: Disabled by ACPI PNP
[   11.970413] PCI: Using ACPI for IRQ routing
[   11.970419] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   12.017584] NET: Registered protocol family 8
[   12.017588] NET: Registered protocol family 20
[   12.017750] AppArmor: AppArmor Filesystem Enabled
[   12.021553] Time: tsc clocksource has been installed.
[   12.029670] system 00:00: iomem range 0xcd000-0xcffff has been reserved
[   12.029675] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[   12.029677] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[   12.029680] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[   12.029683] system 00:00: iomem range 0x4fff0000-0x4fffffff could not be reserved
[   12.029688] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[   12.029691] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[   12.029693] system 00:00: iomem range 0x100000-0x4ffeffff could not be reserved
[   12.029696] system 00:00: iomem range 0xffee0000-0xffefffff could not be reserved
[   12.029699] system 00:00: iomem range 0xfffe0000-0xfffeffff could not be reserved
[   12.029703] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
[   12.029706] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[   12.029716] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[   12.029719] system 00:02: ioport range 0x800-0x805 has been reserved
[   12.029722] system 00:02: ioport range 0x290-0x297 has been reserved
[   12.060912] PCI: Bridge: 0000:00:01.0
[   12.060918]   IO window: 9000-9fff
[   12.060925]   MEM window: e0000000-e00fffff
[   12.060930]   PREFETCH window: d0000000-dfffffff
[   12.060960] NET: Registered protocol family 2
[   12.097506] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   12.097922] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   12.098842] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   12.099313] TCP: Hash tables configured (established 131072 bind 65536)
[   12.099318] TCP reno registered
[   12.109589] checking if image is initramfs... it is
[   12.560511] Switched to high resolution mode on CPU 0
[   12.858085] Freeing initrd memory: 7705k freed
[   12.859416] audit: initializing netlink socket (disabled)
[   12.859436] audit(1210555843.480:1): initialized
[   12.859698] highmem bounce pool size: 64 pages
[   12.864312] VFS: Disk quotas dquot_6.5.1
[   12.864494] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   12.864787] io scheduler noop registered
[   12.864792] io scheduler anticipatory registered
[   12.864794] io scheduler deadline registered
[   12.864827] io scheduler cfq registered (default)
[   12.864875] Boot video device is 0000:01:00.0
[   12.865636] isapnp: Scanning for PnP cards...
[   13.218808] isapnp: No Plug & Play device found
[   13.358975] Real Time Clock Driver v1.12ac
[   13.359212] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   13.359416] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   13.361384] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   13.363705] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   13.363868] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   13.364130] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   13.364552] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.364561] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.371124] mice: PS/2 mouse device common for all mice
[   13.371472] EISA: Probing bus 0 at eisa.0
[   13.371481] Cannot allocate resource for EISA slot 1
[   13.371491] Cannot allocate resource for EISA slot 4
[   13.371508] EISA: Detected 0 cards.
[   13.371512] cpuidle: using governor ladder
[   13.371515] cpuidle: using governor menu
[   13.371647] NET: Registered protocol family 1
[   13.371697] Using IPI No-Shortcut mode
[   13.371752] registered taskstats version 1
[   13.371862]   Magic number: 8:474:508
[   13.371989]   hash matches device 0000:00:01.0
[   13.372005] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   13.372007] EDD information not available.
[   13.372328] Freeing unused kernel memory: 364k freed
[   13.402855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   14.760894] fuse init (API version 7.9)
[   14.789160] ACPI: Fan [FAN] (on)
[   14.798907] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   14.801090] ACPI: Thermal Zone [THRM] (40 C)
[   15.750402] SCSI subsystem initialized
[   15.854185] usbcore: registered new interface driver usbfs
[   15.854223] usbcore: registered new interface driver hub
[   15.863513] libata version 3.00 loaded.
[   15.869815] usbcore: registered new device driver usb
[   15.872481] sis900.c: v1.08.10 Apr. 2 2006
[   15.872567] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[   15.873578] 0000:00:04.0: Unknown PHY transceiver found at address 0.
[   15.874318] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[   15.875033] 0000:00:04.0: Unknown PHY transceiver found at address 2.
[   15.875748] 0000:00:04.0: Unknown PHY transceiver found at address 3.
[   15.876462] 0000:00:04.0: Unknown PHY transceiver found at address 4.
[   15.877176] 0000:00:04.0: Unknown PHY transceiver found at address 5.
[   15.877897] 0000:00:04.0: Unknown PHY transceiver found at address 6.
[   15.878611] 0000:00:04.0: Unknown PHY transceiver found at address 7.
[   15.879325] 0000:00:04.0: Unknown PHY transceiver found at address 8.
[   15.880039] 0000:00:04.0: Unknown PHY transceiver found at address 9.
[   15.880753] 0000:00:04.0: Unknown PHY transceiver found at address 10.
[   15.881477] 0000:00:04.0: Unknown PHY transceiver found at address 11.
[   15.882197] 0000:00:04.0: Unknown PHY transceiver found at address 12.
[   15.882910] 0000:00:04.0: Unknown PHY transceiver found at address 13.
[   15.883623] 0000:00:04.0: Unknown PHY transceiver found at address 14.
[   15.884336] 0000:00:04.0: Unknown PHY transceiver found at address 15.
[   15.885049] 0000:00:04.0: Unknown PHY transceiver found at address 16.
[   15.885766] 0000:00:04.0: Unknown PHY transceiver found at address 17.
[   15.886480] 0000:00:04.0: Unknown PHY transceiver found at address 18.
[   15.887193] 0000:00:04.0: Unknown PHY transceiver found at address 19.
[   15.887907] 0000:00:04.0: Unknown PHY transceiver found at address 20.
[   15.888620] 0000:00:04.0: Unknown PHY transceiver found at address 21.
[   15.889333] 0000:00:04.0: Unknown PHY transceiver found at address 22.
[   15.890049] 0000:00:04.0: Unknown PHY transceiver found at address 23.
[   15.890762] 0000:00:04.0: Unknown PHY transceiver found at address 24.
[   15.891475] 0000:00:04.0: Unknown PHY transceiver found at address 25.
[   15.892189] 0000:00:04.0: Unknown PHY transceiver found at address 26.
[   15.892902] 0000:00:04.0: Unknown PHY transceiver found at address 27.
[   15.893615] 0000:00:04.0: Unknown PHY transceiver found at address 28.
[   15.894333] 0000:00:04.0: Unknown PHY transceiver found at address 29.
[   15.895048] 0000:00:04.0: Unknown PHY transceiver found at address 30.
[   15.895762] 0000:00:04.0: Unknown PHY transceiver found at address 31.
[   15.918097] 0000:00:04.0: Using transceiver found at address 1 as default
[   15.940206] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   16.012345] eth0: SiS 900 PCI Fast Ethernet at 0xc400, IRQ 16, 00:0d:87:36:e9:30
[   16.015540] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17
[   16.015564] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   16.016036] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   16.016069] ohci_hcd 0000:00:03.0: irq 17, io mem 0xe0123000
[   16.062092] Floppy drive(s): fd0 is 1.44M
[   16.071491] usb usb1: configuration #1 chosen from 1 choice
[   16.071534] hub 1-0:1.0: USB hub found
[   16.071548] hub 1-0:1.0: 3 ports detected
[   16.081155] FDC 0 is a post-1991 82077
[   16.173284] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18
[   16.173309] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   16.173360] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   16.173385] ohci_hcd 0000:00:03.1: irq 18, io mem 0xe0120000
[   16.231188] usb usb2: configuration #1 chosen from 1 choice
[   16.231233] hub 2-0:1.0: USB hub found
[   16.231246] hub 2-0:1.0: 3 ports detected
[   16.333148] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
[   16.333170] ehci_hcd 0000:00:03.3: EHCI Host Controller
[   16.333229] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[   16.333272] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[   16.333286] ehci_hcd 0000:00:03.3: irq 19, io mem 0xe0121000
[   16.476542] usb 1-2: new full speed USB device using ohci_hcd and address 2
[   16.488463] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   16.488646] usb usb3: configuration #1 chosen from 1 choice
[   16.488691] hub 3-0:1.0: USB hub found
[   16.488703] hub 3-0:1.0: 6 ports detected
[   16.592586] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 20
[   16.592660] ACPI: PCI interrupt for device 0000:00:02.5 disabled
[   16.598490] pata_sis 0000:00:02.5: version 0.5.2
[   16.598529] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 20
[   16.601268] scsi0 : pata_sis
[   16.602850] scsi1 : pata_sis
[   16.603605] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[   16.603610] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[   16.940114] ata1.00: ATA-6: HDS722580VLAT20, V32OA60A, max UDMA/100
[   16.940120] ata1.00: 160836480 sectors, multi 16: LBA48
[   16.940151] ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66
[   16.964073] ata1.00: configured for UDMA/100
[   17.135526] ata1.01: configured for UDMA/66
[   17.214971] usb 1-2: new full speed USB device using ohci_hcd and address 3
[   17.299145] ata2.00: ATA-5: ST310211A, 3.40, max UDMA/100
[   17.299150] ata2.00: 19541088 sectors, multi 16: LBA
[   17.299167] ata2.00: limited to UDMA/33 due to 40-wire cable
[   17.315132] ata2.00: configured for UDMA/33
[   17.315319] scsi 0:0:0:0: Direct-Access     ATA      HDS722580VLAT20  V32O PQ: 0 ANSI: 5
[   17.317414] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H58N 1.00 PQ: 0 ANSI: 5
[   17.319403] scsi 1:0:0:0: Direct-Access     ATA      ST310211A        3.40 PQ: 0 ANSI: 5
[   17.342827] Driver 'sd' needs updating - please use bus_type methods
[   17.342969] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[   17.343005] sd 0:0:0:0: [sda] Write Protect is off
[   17.343009] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.343059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.343169] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[   17.343201] sd 0:0:0:0: [sda] Write Protect is off
[   17.343204] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.343253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.343261]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   17.356000]  sda1 sda2 < sda5 sda6 sda7 >
[   17.382292] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.382432] sd 1:0:0:0: [sdb] 19541088 512-byte hardware sectors (10005 MB)
[   17.382466] sd 1:0:0:0: [sdb] Write Protect is off
[   17.382469] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   17.382515] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.382647] sd 1:0:0:0: [sdb] 19541088 512-byte hardware sectors (10005 MB)
[   17.382679] sd 1:0:0:0: [sdb] Write Protect is off
[   17.382683] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   17.382728] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.382736]  sdb:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   17.389150] Uniform CD-ROM driver Revision: 3.20
[   17.389230] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   17.401548]  sdb1 sdb2 < sdb5 >
[   17.418997] sd 1:0:0:0: [sdb] Attached SCSI disk
[   17.441793] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.441829] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   17.441871] sd 1:0:0:0: Attached scsi generic sg2 type 0
[   17.442651] usb 1-2: configuration #1 chosen from 1 choice
[   18.104163] Attempting manual resume
[   18.104170] swsusp: Resume From Partition 8:6
[   18.104172] PM: Checking swsusp image.
[   18.104374] PM: Resume from disk failed.
[   18.147417] kjournald starting.  Commit interval 5 seconds
[   18.147439] EXT3-fs: mounted filesystem with ordered data mode.
[   24.564278] ip_tables: © 2000-2006 Netfilter Core Team
[   24.629173] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   25.933218] Linux agpgart interface v0.102
[   25.983964] agpgart: Detected SiS chipset - id:1608
[   26.120887] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   26.170524] agpgart: AGP aperture is 256M @ 0xc0000000
[   26.304558] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   26.351543] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
[   26.488328] input: Power Button (FF) as /devices/virtual/input/input2
[   26.500586] ACPI: Power Button (FF) [PWRF]
[   26.500751] input: Power Button (CM) as /devices/virtual/input/input3
[   26.519985] ACPI: Power Button (CM) [PWRB]
[   28.428225] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21
[   28.532881] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   28.751425] intel8x0_measure_ac97_clock: measured 54817 usecs
[   28.751430] intel8x0: clocking to 48000
[   29.286011] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   29.382177] Linux video capture interface: v2.00
[   29.458145] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(ZC3XX)
[   29.691825] parport_pc 00:09: reported by Plug and Play ACPI
[   29.691902] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   30.033942] usbcore: registered new interface driver gspca
[   30.033950] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
[   30.076846] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
[   30.076913] usbcore: registered new interface driver zc0301
[   32.456931] lp0: using parport0 (interrupt-driven).
[   32.549943] Adding 1140572k swap on /dev/sda6.  Priority:-1 extents:1 across:1140572k
[   32.712088] Adding 979924k swap on /dev/sdb5.  Priority:-2 extents:1 across:979924k
[   33.300120] EXT3 FS on sda7, internal journal
[   35.420759] No dock devices found.
[   36.938972] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   36.938981] apm: overridden by ACPI.
[   42.094012] [drm] Initialized drm 1.1.0 20060810
[   42.104008] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[   42.104171] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[   42.149122] eth0: Media Link On 100mbps full-duplex
[   42.355415] NET: Registered protocol family 17
[   43.663040] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   43.664570] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   43.664579] agpgart: SiS delay workaround: giving bridge time to recover.
[   43.676979] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   44.042250] [drm] Setting GART location based on new memory map
[   44.042266] [drm] Loading R200 Microcode
[   44.042311] [drm] writeback test succeeded in 1 usecs
[   46.997937] NET: Registered protocol family 10
[   46.999544] lo: Disabled Privacy Extensions
[   57.493258] eth0: no IPv6 routers present
[  429.804830] glxinfo[7201]: segfault at 00000200 eip b7f50bad esp bf8280e0 error 4
[  546.137842] glxinfo[7243]: segfault at 00000200 eip b7f78bad esp bfaf03a0 error 4
[  635.641385] glxinfo[7301]: segfault at 00000200 eip b7fdfbad esp bff217d0 error 4
[  643.681600] glxinfo[7304]: segfault at 00000200 eip b7feabad esp bf9039b0 error 4
[  715.132882] glxinfo[7357]: segfault at 00000200 eip b7fb2bad esp bfdf3ea0 error 4
[  754.147097] glxinfo[7491]: segfault at 00000200 eip b7f14bad esp bfe95750 error 4
[  762.618457] glxinfo[7495]: segfault at 00000200 eip b7f4cbad esp bfb18bd0 error 4
ivo@ivo-desktop:~$ gksu gedit etc/X11/xorg.conf



# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,bg"
Option "XkbVariant" ",phonetic"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
 screen "Default Screen"
EndSection
Section "Extensions"
EndSection


glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
   GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
   GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
   GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
   GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
   GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
   GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
   GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
   GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
   GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
   GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,
   GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
   GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
   GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
   GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample,
   GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group,
   GLX_EXT_texture_from_pixmap
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R200 20060602 AGP 8x x86/MMX/SSE2 TCL
OpenGL version string: 1.3 Mesa 7.0.3-rc2
OpenGL extensions:
   GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
   GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_texture_border_clamp,
   GL_ARB_texture_compression, GL_ARB_texture_cube_map,
   GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
   GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
   GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
   GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos,
   GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
   GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
   GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
   GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
   GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
   GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
   GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
   GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
   GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
   GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
   GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
   GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
   GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
   GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
   GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
   GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texgen_reflection,
   GL_NV_texture_rectangle, GL_SGI_color_matrix, GL_SGI_color_table,
   GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
   GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays

  visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x24 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x26 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x27 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x29 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2b 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2c 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x2d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2e 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2f 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x30 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x31 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x32 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x5e 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon
Segmentation fault
ivo@ivo-desktop:~$                                                            
Извинявам се, но не видях откъде се прикачва файл.
Контакти:  pifivo

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #8 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Май 12 2008, 02:05

No avatar chosen




Група: Li fans
Мнения: 7
Регистриран: Май 2008

Оценка: няма

Offline
При мен нещо се сбъгяса работата, та възстанових от предния xorg.conf - предварително записан, че резолюцията беше малка и не можеше да се променя.
Ето отчета от написаните по-горе команди:

[    0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
[    0.000000]  BIOS-e820: 000000004fff0000 - 000000004fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000004fff3000 - 0000000050000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 383MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5c80
[    0.000000] Entering add_active_range(0, 0, 327664) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   327664
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   327664
[    0.000000] On node 0 totalpages: 327664
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 767 pages used for memmap
[    0.000000]   HighMem zone: 97521 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F75E0 checksum 0
[    0.000000] ACPI: RSDP 000F75E0, 0014 (r0 AWARD )
[    0.000000] ACPI: RSDT 4FFF3000, 002C (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 4FFF3040, 0074 (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 4FFF30C0, 37E3 (r1 AWARD  AWRDACPI     1000 MSFT  100000D)
[    0.000000] ACPI: FACS 4FFF0000, 0040
[    0.000000] ACPI: APIC 4FFF68C0, 0068 (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 325105
[    0.000000] Kernel command line: root=UUID=10757be7-0c5a-48c1-a09d-b1891f277fc4 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2410.312 MHz processor.
[   11.206081] Console: colour VGA+ 80x25
[   11.206087] console [tty0] enabled
[   11.206538] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   11.207247] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   11.274902] Memory: 1286576k/1310656k available (2157k kernel code, 22860k reserved, 998k data, 364k init, 393152k highmem)
[   11.274912] virtual kernel memory layout:
[   11.274913]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   11.274914]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   11.274916]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   11.274917]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   11.274918]       .init : 0xc041b000 - 0xc0476000   ( 364 kB)
[   11.274919]       .data : 0xc031b5a4 - 0xc0414dc4   ( 998 kB)
[   11.274920]       .text : 0xc0100000 - 0xc031b5a4   (2157 kB)
[   11.274924] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   11.274981] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   11.354848] Calibrating delay using timer specific routine.. 4824.58 BogoMIPS (lpj=9649177)
[   11.354886] Security Framework initialized
[   11.354894] SELinux:  Disabled at boot.
[   11.354913] AppArmor: AppArmor initialized
[   11.354919] Failure registering capabilities with primary security module.
[   11.354932] Mount-cache hash table entries: 512
[   11.355130] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[   11.355149] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   11.355152] CPU: L2 cache: 128K
[   11.355156] CPU: Hyper-Threading is disabled
[   11.355159] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[   11.355174] Compat vDSO mapped to ffffe000.
[   11.355191] Checking 'hlt' instruction... OK.
[   11.371247] SMP alternatives: switching to UP code
[   11.373062] Freeing SMP alternatives: 11k freed
[   11.373224] Early unpacking initramfs... done
[   11.770177] ACPI: Core revision 20070126
[   11.770239] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   11.773378] CPU0: Intel® Celeron® CPU 2.00GHz stepping 09
[   11.773427] Total of 1 processors activated (4824.58 BogoMIPS).
[   11.773531] ENABLING IO-APIC IRQs
[   11.773706] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   11.917843] Brought up 1 CPUs
[   11.917870] CPU0 attaching sched-domain:
[   11.917874]  domain 0: span 01
[   11.917876]   groups: 01
[   11.918228] net_namespace: 64 bytes
[   11.918238] Booting paravirtualized kernel on bare hardware
[   11.919090] Time:  1:30:43  Date: 05/12/08
[   11.919136] NET: Registered protocol family 16
[   11.919753] EISA bus registered
[   11.919792] ACPI: bus type pci registered
[   11.931540] PCI: PCI BIOS revision 2.10 entry at 0xfb920, last bus=1
[   11.931544] PCI: Using configuration type 1
[   11.931546] Setting up standard PCI resources
[   11.935108] ACPI: EC: Look up EC in DSDT
[   11.938952] ACPI: Interpreter enabled
[   11.938959] ACPI: (supports S0 S1 S4 S5)
[   11.938983] ACPI: Using IOAPIC for interrupt routing
[   11.947854] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   11.948153] Enabling SiS 96x SMBus.
[   11.948956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   11.963729] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[   11.963885] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[   11.964033] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[   11.964195] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[   11.964344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[   11.964489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[   11.964629] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[   11.964774] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 14 15)
[   11.965095] Linux Plug and Play Support v0.97 © Adam Belay
[   11.965193] pnp: PnP ACPI init
[   11.965209] ACPI: bus type pnp registered
[   11.969613] pnp: PnP ACPI: found 12 devices
[   11.969620] ACPI: ACPI bus type pnp unregistered
[   11.969625] PnPBIOS: Disabled by ACPI PNP
[   11.970413] PCI: Using ACPI for IRQ routing
[   11.970419] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   12.017584] NET: Registered protocol family 8
[   12.017588] NET: Registered protocol family 20
[   12.017750] AppArmor: AppArmor Filesystem Enabled
[   12.021553] Time: tsc clocksource has been installed.
[   12.029670] system 00:00: iomem range 0xcd000-0xcffff has been reserved
[   12.029675] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[   12.029677] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[   12.029680] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[   12.029683] system 00:00: iomem range 0x4fff0000-0x4fffffff could not be reserved
[   12.029688] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[   12.029691] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[   12.029693] system 00:00: iomem range 0x100000-0x4ffeffff could not be reserved
[   12.029696] system 00:00: iomem range 0xffee0000-0xffefffff could not be reserved
[   12.029699] system 00:00: iomem range 0xfffe0000-0xfffeffff could not be reserved
[   12.029703] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
[   12.029706] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[   12.029716] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[   12.029719] system 00:02: ioport range 0x800-0x805 has been reserved
[   12.029722] system 00:02: ioport range 0x290-0x297 has been reserved
[   12.060912] PCI: Bridge: 0000:00:01.0
[   12.060918]   IO window: 9000-9fff
[   12.060925]   MEM window: e0000000-e00fffff
[   12.060930]   PREFETCH window: d0000000-dfffffff
[   12.060960] NET: Registered protocol family 2
[   12.097506] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   12.097922] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   12.098842] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   12.099313] TCP: Hash tables configured (established 131072 bind 65536)
[   12.099318] TCP reno registered
[   12.109589] checking if image is initramfs... it is
[   12.560511] Switched to high resolution mode on CPU 0
[   12.858085] Freeing initrd memory: 7705k freed
[   12.859416] audit: initializing netlink socket (disabled)
[   12.859436] audit(1210555843.480:1): initialized
[   12.859698] highmem bounce pool size: 64 pages
[   12.864312] VFS: Disk quotas dquot_6.5.1
[   12.864494] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   12.864787] io scheduler noop registered
[   12.864792] io scheduler anticipatory registered
[   12.864794] io scheduler deadline registered
[   12.864827] io scheduler cfq registered (default)
[   12.864875] Boot video device is 0000:01:00.0
[   12.865636] isapnp: Scanning for PnP cards...
[   13.218808] isapnp: No Plug & Play device found
[   13.358975] Real Time Clock Driver v1.12ac
[   13.359212] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   13.359416] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   13.361384] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   13.363705] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   13.363868] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   13.364130] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   13.364552] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.364561] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.371124] mice: PS/2 mouse device common for all mice
[   13.371472] EISA: Probing bus 0 at eisa.0
[   13.371481] Cannot allocate resource for EISA slot 1
[   13.371491] Cannot allocate resource for EISA slot 4
[   13.371508] EISA: Detected 0 cards.
[   13.371512] cpuidle: using governor ladder
[   13.371515] cpuidle: using governor menu
[   13.371647] NET: Registered protocol family 1
[   13.371697] Using IPI No-Shortcut mode
[   13.371752] registered taskstats version 1
[   13.371862]   Magic number: 8:474:508
[   13.371989]   hash matches device 0000:00:01.0
[   13.372005] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   13.372007] EDD information not available.
[   13.372328] Freeing unused kernel memory: 364k freed
[   13.402855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   14.760894] fuse init (API version 7.9)
[   14.789160] ACPI: Fan [FAN] (on)
[   14.798907] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   14.801090] ACPI: Thermal Zone [THRM] (40 C)
[   15.750402] SCSI subsystem initialized
[   15.854185] usbcore: registered new interface driver usbfs
[   15.854223] usbcore: registered new interface driver hub
[   15.863513] libata version 3.00 loaded.
[   15.869815] usbcore: registered new device driver usb
[   15.872481] sis900.c: v1.08.10 Apr. 2 2006
[   15.872567] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[   15.873578] 0000:00:04.0: Unknown PHY transceiver found at address 0.
[   15.874318] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[   15.875033] 0000:00:04.0: Unknown PHY transceiver found at address 2.
[   15.875748] 0000:00:04.0: Unknown PHY transceiver found at address 3.
[   15.876462] 0000:00:04.0: Unknown PHY transceiver found at address 4.
[   15.877176] 0000:00:04.0: Unknown PHY transceiver found at address 5.
[   15.877897] 0000:00:04.0: Unknown PHY transceiver found at address 6.
[   15.878611] 0000:00:04.0: Unknown PHY transceiver found at address 7.
[   15.879325] 0000:00:04.0: Unknown PHY transceiver found at address 8.
[   15.880039] 0000:00:04.0: Unknown PHY transceiver found at address 9.
[   15.880753] 0000:00:04.0: Unknown PHY transceiver found at address 10.
[   15.881477] 0000:00:04.0: Unknown PHY transceiver found at address 11.
[   15.882197] 0000:00:04.0: Unknown PHY transceiver found at address 12.
[   15.882910] 0000:00:04.0: Unknown PHY transceiver found at address 13.
[   15.883623] 0000:00:04.0: Unknown PHY transceiver found at address 14.
[   15.884336] 0000:00:04.0: Unknown PHY transceiver found at address 15.
[   15.885049] 0000:00:04.0: Unknown PHY transceiver found at address 16.
[   15.885766] 0000:00:04.0: Unknown PHY transceiver found at address 17.
[   15.886480] 0000:00:04.0: Unknown PHY transceiver found at address 18.
[   15.887193] 0000:00:04.0: Unknown PHY transceiver found at address 19.
[   15.887907] 0000:00:04.0: Unknown PHY transceiver found at address 20.
[   15.888620] 0000:00:04.0: Unknown PHY transceiver found at address 21.
[   15.889333] 0000:00:04.0: Unknown PHY transceiver found at address 22.
[   15.890049] 0000:00:04.0: Unknown PHY transceiver found at address 23.
[   15.890762] 0000:00:04.0: Unknown PHY transceiver found at address 24.
[   15.891475] 0000:00:04.0: Unknown PHY transceiver found at address 25.
[   15.892189] 0000:00:04.0: Unknown PHY transceiver found at address 26.
[   15.892902] 0000:00:04.0: Unknown PHY transceiver found at address 27.
[   15.893615] 0000:00:04.0: Unknown PHY transceiver found at address 28.
[   15.894333] 0000:00:04.0: Unknown PHY transceiver found at address 29.
[   15.895048] 0000:00:04.0: Unknown PHY transceiver found at address 30.
[   15.895762] 0000:00:04.0: Unknown PHY transceiver found at address 31.
[   15.918097] 0000:00:04.0: Using transceiver found at address 1 as default
[   15.940206] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   16.012345] eth0: SiS 900 PCI Fast Ethernet at 0xc400, IRQ 16, 00:0d:87:36:e9:30
[   16.015540] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17
[   16.015564] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   16.016036] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   16.016069] ohci_hcd 0000:00:03.0: irq 17, io mem 0xe0123000
[   16.062092] Floppy drive(s): fd0 is 1.44M
[   16.071491] usb usb1: configuration #1 chosen from 1 choice
[   16.071534] hub 1-0:1.0: USB hub found
[   16.071548] hub 1-0:1.0: 3 ports detected
[   16.081155] FDC 0 is a post-1991 82077
[   16.173284] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18
[   16.173309] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   16.173360] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   16.173385] ohci_hcd 0000:00:03.1: irq 18, io mem 0xe0120000
[   16.231188] usb usb2: configuration #1 chosen from 1 choice
[   16.231233] hub 2-0:1.0: USB hub found
[   16.231246] hub 2-0:1.0: 3 ports detected
[   16.333148] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
[   16.333170] ehci_hcd 0000:00:03.3: EHCI Host Controller
[   16.333229] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[   16.333272] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[   16.333286] ehci_hcd 0000:00:03.3: irq 19, io mem 0xe0121000
[   16.476542] usb 1-2: new full speed USB device using ohci_hcd and address 2
[   16.488463] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   16.488646] usb usb3: configuration #1 chosen from 1 choice
[   16.488691] hub 3-0:1.0: USB hub found
[   16.488703] hub 3-0:1.0: 6 ports detected
[   16.592586] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 20
[   16.592660] ACPI: PCI interrupt for device 0000:00:02.5 disabled
[   16.598490] pata_sis 0000:00:02.5: version 0.5.2
[   16.598529] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 20
[   16.601268] scsi0 : pata_sis
[   16.602850] scsi1 : pata_sis
[   16.603605] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[   16.603610] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[   16.940114] ata1.00: ATA-6: HDS722580VLAT20, V32OA60A, max UDMA/100
[   16.940120] ata1.00: 160836480 sectors, multi 16: LBA48
[   16.940151] ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66
[   16.964073] ata1.00: configured for UDMA/100
[   17.135526] ata1.01: configured for UDMA/66
[   17.214971] usb 1-2: new full speed USB device using ohci_hcd and address 3
[   17.299145] ata2.00: ATA-5: ST310211A, 3.40, max UDMA/100
[   17.299150] ata2.00: 19541088 sectors, multi 16: LBA
[   17.299167] ata2.00: limited to UDMA/33 due to 40-wire cable
[   17.315132] ata2.00: configured for UDMA/33
[   17.315319] scsi 0:0:0:0: Direct-Access     ATA      HDS722580VLAT20  V32O PQ: 0 ANSI: 5
[   17.317414] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H58N 1.00 PQ: 0 ANSI: 5
[   17.319403] scsi 1:0:0:0: Direct-Access     ATA      ST310211A        3.40 PQ: 0 ANSI: 5
[   17.342827] Driver 'sd' needs updating - please use bus_type methods
[   17.342969] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[   17.343005] sd 0:0:0:0: [sda] Write Protect is off
[   17.343009] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.343059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.343169] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[   17.343201] sd 0:0:0:0: [sda] Write Protect is off
[   17.343204] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.343253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.343261]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   17.356000]  sda1 sda2 < sda5 sda6 sda7 >
[   17.382292] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.382432] sd 1:0:0:0: [sdb] 19541088 512-byte hardware sectors (10005 MB)
[   17.382466] sd 1:0:0:0: [sdb] Write Protect is off
[   17.382469] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   17.382515] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.382647] sd 1:0:0:0: [sdb] 19541088 512-byte hardware sectors (10005 MB)
[   17.382679] sd 1:0:0:0: [sdb] Write Protect is off
[   17.382683] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   17.382728] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.382736]  sdb:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   17.389150] Uniform CD-ROM driver Revision: 3.20
[   17.389230] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   17.401548]  sdb1 sdb2 < sdb5 >
[   17.418997] sd 1:0:0:0: [sdb] Attached SCSI disk
[   17.441793] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.441829] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   17.441871] sd 1:0:0:0: Attached scsi generic sg2 type 0
[   17.442651] usb 1-2: configuration #1 chosen from 1 choice
[   18.104163] Attempting manual resume
[   18.104170] swsusp: Resume From Partition 8:6
[   18.104172] PM: Checking swsusp image.
[   18.104374] PM: Resume from disk failed.
[   18.147417] kjournald starting.  Commit interval 5 seconds
[   18.147439] EXT3-fs: mounted filesystem with ordered data mode.
[   24.564278] ip_tables: © 2000-2006 Netfilter Core Team
[   24.629173] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   25.933218] Linux agpgart interface v0.102
[   25.983964] agpgart: Detected SiS chipset - id:1608
[   26.120887] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   26.170524] agpgart: AGP aperture is 256M @ 0xc0000000
[   26.304558] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   26.351543] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
[   26.488328] input: Power Button (FF) as /devices/virtual/input/input2
[   26.500586] ACPI: Power Button (FF) [PWRF]
[   26.500751] input: Power Button (CM) as /devices/virtual/input/input3
[   26.519985] ACPI: Power Button (CM) [PWRB]
[   28.428225] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21
[   28.532881] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   28.751425] intel8x0_measure_ac97_clock: measured 54817 usecs
[   28.751430] intel8x0: clocking to 48000
[   29.286011] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   29.382177] Linux video capture interface: v2.00
[   29.458145] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(ZC3XX)
[   29.691825] parport_pc 00:09: reported by Plug and Play ACPI
[   29.691902] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   30.033942] usbcore: registered new interface driver gspca
[   30.033950] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
[   30.076846] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
[   30.076913] usbcore: registered new interface driver zc0301
[   32.456931] lp0: using parport0 (interrupt-driven).
[   32.549943] Adding 1140572k swap on /dev/sda6.  Priority:-1 extents:1 across:1140572k
[   32.712088] Adding 979924k swap on /dev/sdb5.  Priority:-2 extents:1 across:979924k
[   33.300120] EXT3 FS on sda7, internal journal
[   35.420759] No dock devices found.
[   36.938972] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   36.938981] apm: overridden by ACPI.
[   42.094012] [drm] Initialized drm 1.1.0 20060810
[   42.104008] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[   42.104171] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[   42.149122] eth0: Media Link On 100mbps full-duplex
[   42.355415] NET: Registered protocol family 17
[   43.663040] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   43.664570] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   43.664579] agpgart: SiS delay workaround: giving bridge time to recover.
[   43.676979] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   44.042250] [drm] Setting GART location based on new memory map
[   44.042266] [drm] Loading R200 Microcode
[   44.042311] [drm] writeback test succeeded in 1 usecs
[   46.997937] NET: Registered protocol family 10
[   46.999544] lo: Disabled Privacy Extensions
[   57.493258] eth0: no IPv6 routers present
[  429.804830] glxinfo[7201]: segfault at 00000200 eip b7f50bad esp bf8280e0 error 4
[  546.137842] glxinfo[7243]: segfault at 00000200 eip b7f78bad esp bfaf03a0 error 4
[  635.641385] glxinfo[7301]: segfault at 00000200 eip b7fdfbad esp bff217d0 error 4
[  643.681600] glxinfo[7304]: segfault at 00000200 eip b7feabad esp bf9039b0 error 4
[  715.132882] glxinfo[7357]: segfault at 00000200 eip b7fb2bad esp bfdf3ea0 error 4
[  754.147097] glxinfo[7491]: segfault at 00000200 eip b7f14bad esp bfe95750 error 4
[  762.618457] glxinfo[7495]: segfault at 00000200 eip b7f4cbad esp bfb18bd0 error 4
ivo@ivo-desktop:~$ gksu gedit etc/X11/xorg.conf



# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,bg"
Option "XkbVariant" ",phonetic"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
 screen "Default Screen"
EndSection
Section "Extensions"
EndSection


glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
   GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
   GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
   GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
   GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
   GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
   GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
   GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
   GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
   GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
   GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,
   GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
   GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
   GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
   GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample,
   GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group,
   GLX_EXT_texture_from_pixmap
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R200 20060602 AGP 8x x86/MMX/SSE2 TCL
OpenGL version string: 1.3 Mesa 7.0.3-rc2
OpenGL extensions:
   GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
   GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_texture_border_clamp,
   GL_ARB_texture_compression, GL_ARB_texture_cube_map,
   GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
   GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
   GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
   GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos,
   GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
   GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
   GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
   GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
   GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
   GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
   GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
   GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
   GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
   GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
   GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
   GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
   GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
   GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
   GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
   GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texgen_reflection,
   GL_NV_texture_rectangle, GL_SGI_color_matrix, GL_SGI_color_table,
   GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
   GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays

  visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x24 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x26 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x27 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x29 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2b 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2c 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x2d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2e 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2f 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x30 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x31 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x32 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x5e 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon
Segmentation fault
ivo@ivo-desktop:~$                                                            
Извинявам се, но не видях откъде се прикачва файл.
Контакти:  pifivo

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #9 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Май 12 2008, 09:13

No avatar chosen




Група: Li maniacs
Мнения: 153
Регистриран: Февруари 2007

Оценка: няма

Offline
@pifivo: Какво точно си направил, за да се сбъгяса работата? Защото от това, което показват командите, доколкото успявам да ги разбера, нямаш разпознати видео драйвъри. Опитай с
sudo dpkg-reconfigure xserver-xorg
След това можеш да опиташ да изкараш TV-Out с xrandr -> LINK
Доколкото знам, в BG се използва TV-ситема PAL, а не NTSC; информацията на връзката е от преди 6 месеца; може междувременно да са оправили поддръжката на ATI картите за PAL.

@Lizzarda: Не успях да разбера какъв точно е проблема - имаш ли графичен интерфейс? Или пишеш от конзола?
System -> Administration -> Restricted Drivers Manager
Ако има чавка за твоята карта я махни. След това инсталирай envy по горния начин.

Редактирано от cdiem на Май 12 2008, 09:25
Контакти:  cdiem

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #10
Skip to the previous post in this topic. Написано на: Май 12 2008, 13:55

Avatar




Група: Li fans
Мнения: 58
Регистриран: Май 2008

Оценка: няма

Offline
Quote: (cdiem @ May 12 2008, 09:13)

@pifivo: Какво точно си направил, за да се сбъгяса работата? Защото от това, което показват командите, доколкото успявам да ги разбера, нямаш разпознати видео драйвъри. Опитай с
sudo dpkg-reconfigure xserver-xorg
След това можеш да опиташ да изкараш TV-Out с xrandr -> LINK
Доколкото знам, в BG се използва TV-ситема PAL, а не NTSC; информацията на връзката е от преди 6 месеца; може междувременно да са оправили поддръжката на ATI картите за PAL.

@Lizzarda: Не успях да разбера какъв точно е проблема - имаш ли графичен интерфейс? Или пишеш от конзола?
System -> Administration -> Restricted Drivers Manager
Ако има чавка за твоята карта я махни. След това инсталирай envy по горния начин.

Почти всичко ми е на български в System > Администрация на системата ->
Quote: 

Дата и Час | Диспечел на Актуализацийте | Езикова Поддръжка | Мениджър На Пакети (Synaptic) | Мрежа | Мрежови Инструменти | Наблюдение на Системата | Печатане | Потребители и Групи | Системен Дневник | Услуги | Autorizations | Hardware | Hardware Testing | Software Sources |


Това е което имам в показания път от теб, до колкото знам съм със Linux Ubuntu 8.04 Desktop Edition..

Редактирано от Lizzarda на Май 13 2008, 15:38
Контакти:  Lizzarda

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Общо 18 отговор(а) от Май 11 2008, 18:47 до сега
 » Начало » Li Форуми » Help & Support » Kernels & Drivers » Проблем при инстал на драйвъри за Radeon A9250

© 2014 Linux Index Project
Powered by iF 1.0.0 © 2006 ikonForums