Запомняне

» Здравейте
[ Вход :: Регистриране ]
 » Начало » Li Форуми » Help & Support » Servers & Services » suse 10.1 - courier imap
Тема: suse 10.1 - courier imap, port 143 closed
Мнение #1 Skip to the next post in this topic.
Написано на: Септември 25 2006, 17:55
pecito

No avatar chosen




Група: Li fans
Мнения: 25
Регистриран: Август 2005

Оценка: няма

Offline
опитвам се да си пусна маил сървър на компа със suse 10.1 инсталнах courier i postfix  мислия че настроих виртуалните хостове но много странно не ми отваря 143 порт  пробвах с iptables пак не иска със socklist не ми го листва като съответствие порт услуга като на 25 съответства smtp дайте ми идея ко да направя че откачих вече. елементарна работа е мисля но ме замаза яко
Контакти:  pecito
WEB  
Мнение #2 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Септември 25 2006, 19:29

Avatar




Група: Li psychos
Мнения: 380
Регистриран: Април 2005

Offline
дай резултат от
Код: 

ps ax | grep imapd


Код: 

telnet localhost 143

"Linux is for people who hate Windows, BSD is for people who love UNIX"
Контакти:  gog

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #3 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Септември 25 2006, 21:45
pecito

No avatar chosen




Група: Li fans
Мнения: 25
Регистриран: Август 2005

Оценка: няма

Offline
ето резултат
1:
telnet 10.8.109.22 143
Trying 10.8.109.22...
telnet: connect to address 10.8.109.22: Connection refused
2:
telnet localhost 143
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
Trying ::1...
telnet: connect to address ::1: Connection refused
3:
telnet 192.168.0.20 143
Trying 192.168.0.20...
telnet: connect to address 192.168.0.20: Connection refused

4:
ps ax | grep imap
3480 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/authdaemon.courier-imap/pid -start /usr/lib/courier-authlib/authdaemond
3546 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/pop3d.pid -start -name=pop3d /usr/lib/courier-imap/couriertcpd -address=0 -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup 110 /usr/sbin/pop3login /usr/sbin/pop3d Maildir
3547 ?        S      0:00 /usr/lib/courier-imap/couriertcpd -address=0 -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup 110 /usr/sbin/pop3login /usr/sbin/pop3d Maildir
3555 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/imapd-ssl.pid -start -name=imapd-ssl /usr/lib/courier-imap/couriertcpd -address=0 -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup 993 /usr/sbin/couriertls -server -tcpd /usr/sbin/imaplogin /usr/sbin/imapd Maildir
3556 ?        S      0:00 /usr/lib/courier-imap/couriertcpd -address=0 -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup 993 /usr/sbin/couriertls -server -tcpd /usr/sbin/imaplogin /usr/sbin/imapd Maildir
3626 ?        S      0:00 /usr/sbin/courierlogger -pid=/var/run/pop3d-ssl.pid -start -name=pop3d /usr/lib/courier-imap/couriertcpd -address=0 -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup 995 /usr/sbin/couriertls -server -tcpd /usr/sbin/pop3login /usr/sbin/pop3d Maildir
3627 ?        S      0:00 /usr/lib/courier-imap/couriertcpd -address=0 -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup 995 /usr/sbin/couriertls -server -tcpd /usr/sbin/pop3login /usr/sbin/pop3d Maildir

1 2 3 резултати са от различни мрежи към един комп а 4 е разултат от ps ax
Контакти:  pecito
WEB  
Мнение #4 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Септември 25 2006, 22:31

Avatar




Група: Li psychos
Мнения: 380
Регистриран: Април 2005

Offline
imap демона си го конфигурирал да слуша само на 993 порт - ssl
прегледай в конфигурационния файл за тази забрана или в опциите мисля че се казваше кое да ти се пуска
дай да видим конф файла
мисля че трябва да е
Код: 
/etc/courier/imapd

"Linux is for people who hate Windows, BSD is for people who love UNIX"
Контакти:  gog

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #5 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Септември 26 2006, 10:23
pecito

No avatar chosen




Група: Li fans
Мнения: 25
Регистриран: Август 2005

Оценка: няма

Offline
ето imapd файла
Код: 

##VERSION: $Id: imapd.dist.in,v 1.37 2005/07/05 12:31:27 mrsam Exp $
#
# imapd created from imapd.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
#  Copyright 1998 - 2005 Double Precision, Inc.  See COPYING for
#  distribution information.
#
#  This configuration file sets various options for the Courier-IMAP server
#  when used with the couriertcpd server.
#  A lot of the stuff here is documented in the manual page for couriertcpd.
#
#  NOTE - do not use \ to split long variable contents on multiple lines.
#  This will break the default imapd.rc ######, which parses this file.
#
##NAME: ADDRESS:0
#
#  Address to listen on, can be set to a single IP address.
#
# ADDRESS=127.0.0.1

ADDRESS=192.168.0.0/24,10.8.109.0/24,84.22.2.242/29,127.0.0.0/8

##NAME: PORT:1
#
#  Port numbers that connections are accepted on.  The default is 143,
#  the standard IMAP port.
#
#  Multiple port numbers can be separated by commas.  When multiple port
#  numbers are used it is possible to select a specific IP address for a
#  given port as "ip.port".  For example, "127.0.0.1.900,192.68.0.1.900"
#  accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
#  The previous ADDRESS setting is a default for ports that do not have
#  a specified IP address.

PORT=143

##NAME: AUTHSERVICE:0
#
#  It's possible to authenticate using a different 'service' parameter
#  depending on the connection's port.  This only works with authentication
#  modules that use the 'service' parameter, such as PAM.  Example:
#
 AUTHSERVICE143=imap
#  AUTHSERVICE993=imaps

##NAME: MAXDAEMONS:0
#
#  Maximum number of IMAP servers started
#

MAXDAEMONS=40

##NAME: MAXPERIP:0
#
#  Maximum number of connections to accept from the same IP address

MAXPERIP=4

##NAME: PIDFILE:0
#
#  File where couriertcpd will save its process ID
#

PIDFILE=/var/run/imapd.pid

##NAME: TCPDOPTS:0
#
# Miscellaneous couriertcpd options that shouldn't be changed.
#

TCPDOPTS="-nodnslookup -noidentlookup"

##NAME: LOGGEROPTS:0
#
# courierlogger(1) options.                                        
#

LOGGEROPTS="-name=imapd"

##NAME: DEFDOMAIN:0
#
# Optional default domain. If the username does not contain the        
# first character of DEFDOMAIN, then it is appended to the username.
# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended
# only if the username does not contain any character from DOMAINSEP.
# You can set different default domains based on the the interface IP
# address using the -access and -accesslocal options of couriertcpd(1).

#DEFDOMAIN="@example.com"

##NAME: IMAP_CAPABILITY:1
#
# IMAP_CAPABILITY specifies what most of the response should be to the
# CAPABILITY command.
#
# If you have properly configured Courier to use CRAM-MD5, CRAM-SHA1, or
# CRAM-SHA256 authentication (see INSTALL), set IMAP_CAPABILITY as follows:
#
# IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE"
#

IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE"

##NAME: KEYWORDS_CAPABILITY:0
#
# IMAP_KEYWORDS=1 enables custom IMAP keywords.  Set this option to 0 to
# disable custom keywords.

IMAP_KEYWORDS=1

##NAME: SMAP1_CAPABILITY:0
#
# EXPERIMENTAL
#
# To enable the experimental "Simple Mail Access Protocol" extensions,
# uncomment the following setting.
#
# SMAP_CAPABILITY=SMAP1

##NAME: IMAP_CAPABILITY_ORIG:2
#
# For use by webadmin

IMAP_CAPABILITY_ORIG="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE"

##NAME: IMAP_PROXY:0
#
# Enable proxying.  See README.proxy

IMAP_PROXY=0

##NAME: PROXY_HOSTNAME:0
#
# Override value from gethostname() when checking if a proxy connection is
# required.
#
# PROXY_HOSTNAME=

##NAME: IMAP_PROXY_FOREIGN:0
#
# Proxying to non-Courier servers.  Re-sends the CAPABILITY command after
# logging in to the remote server.  May not work with all IMAP clients.

IMAP_PROXY_FOREIGN=0

##NAME: IMAP_IDLE_TIMEOUT:0
#
# This setting controls how often
# the server polls for changes to the folder, in IDLE mode (in seconds).

IMAP_IDLE_TIMEOUT=60

##NAME: IMAP_CAPABILITY_TLS:0
#
# The following setting will advertise SASL PLAIN authentication after
# STARTTLS is established.  If you want to allow SASL PLAIN authentication
# with or without TLS then just comment this out, and add AUTH=PLAIN to
# IMAP_CAPABILITY

IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN"

##NAME: IMAP_TLS_ORIG:0
#
# For use by webadmin

IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN"

##NAME: IMAP_DISABLETHREADSORT:0
#
# Set IMAP_DISABLETHREADSORT to disable the THREAD and SORT commands -
# server side sorting and threading.
#
# Those capabilities will still be advertised, but the server will reject
# them.  Set this option if you want to disable all the extra load from
# server-side threading and sorting.  Not advertising those capabilities
# will simply result in the clients reading the entire folder, and sorting
# it on the client side.  That will still put some load on the server.
# advertising these capabilities, but rejecting the commands, will stop this
# silliness.
#

IMAP_DISABLETHREADSORT=0

##NAME: IMAP_CHECK_ALL_FOLDERS:0
#
# Set IMAP_CHECK_ALL_FOLDERS to 1 if you want the server to check for new
# mail in every folder.  Not all IMAP clients use the IMAP's new mail
# indicator, but some do.  Normally new mail is checked only in INBOX,
# because it is a comparatively time consuming operation, and it would be
# a complete waste of time unless mail filters are used to deliver
# mail directly to folders.
#
# When IMAP clients are used which support new mail indication, and when
# mail filters are used to sort incoming mail into folders, setting
# IMAP_CHECK_ALL_FOLDERS to 1 will allow IMAP clients to announce new
# mail in folders.  Note that this will result in slightly more load on the
# server.
#

IMAP_CHECK_ALL_FOLDERS=0

##NAME: IMAP_OBSOLETE_CLIENT:0
#
# Set IMAP_OBSOLETE_CLIENT if your IMAP client expects \\NoInferiors to mean
# what \\HasNoChildren really means.

IMAP_OBSOLETE_CLIENT=0

##NAME: IMAP_UMASK:0
#
# IMAP_UMASK sets the umask of the server process.  The value of IMAP_UMASK is
# simply passed to the "umask" command.  The default value is 022.
#
# This feature is mostly useful for shared folders, where the file permissions
# of the messages may be important.

IMAP_UMASK=022

##NAME: IMAP_ULIMITD:0
#
# IMAP_ULIMITD sets the maximum size of the data segment of the server
# process.  The value of IMAP_ULIMITD is simply passed to the "ulimit -d"
# command (or ulimit -v).  The argument to ulimi sets the upper limit on the
# size of the data segment of the server process, in kilobytes.  The default
# value of 65536 sets a very generous limit of 64 megabytes, which should
# be more than plenty for anyone.
#
# This feature is used as an additional safety check that should stop
# any potential denial-of-service attacks that exploit any kind of
# a memory leak to exhaust all the available memory on the server.
# It is theoretically possible that obscenely huge folders will also
# result in the server running out of memory when doing server-side
# sorting (by my calculations you have to have at least 100,000 messages
# in a single folder, for that to happen).

IMAP_ULIMITD=65536

##NAME: IMAP_USELOCKS:0
#
# Setting IMAP_USELOCKS to 1 will use dot-locking to support concurrent
# multiple access to the same folder.  This incurs slight additional
# overhead.  Concurrent multiple access will still work without this setting,
# however occasionally a minor race condition may result in an IMAP client
# downloading the same message twice, or a keyword update will fail.
#
# IMAP_USELOCKS=1 is strongly recommended when shared folders are used.

IMAP_USELOCKS=1

##NAME: IMAP_SHAREDINDEXFILE:0
#
# The index of all accessible folders.  Do not change this setting unless
# you know what you're doing.  See README.sharedfolders for additional
# information.

IMAP_SHAREDINDEXFILE=/etc/courier/shared/index

##NAME: IMAP_ENHANCEDIDLE:0
#
# If Courier was compiled with the File Alteration Monitor, setting
# IMAP_ENHANCEDIDLE to 1 enables enhanced IDLE mode, where multiple
# clients may open the same folder concurrently, and receive updates to
# folder contents in realtime.  See the imapd(8) man page for additional
# information.
#
# IMPORTANT: IMAP_USELOCKS *MUST* also be set to 1, and IDLE must be included
# in the IMAP_CAPABILITY list.
#

IMAP_ENHANCEDIDLE=0

##NAME: IMAP_TRASHFOLDERNAME:0
#
# The name of the magic trash Folder.  For MSOE compatibility,
# you can set IMAP_TRASHFOLDERNAME="Deleted Items".
#
# IMPORTANT:  If you change this, you must also change IMAP_EMPTYTRASH

IMAP_TRASHFOLDERNAME=Trash

##NAME: IMAP_EMPTYTRASH:0
#
# The following setting is optional, and causes messages from the given
# folder to be automatically deleted after the given number of days.
# IMAP_EMPTYTRASH is a comma-separated list of folder:days.  The default
# setting, below, purges 7 day old messages from the Trash folder.
# Another useful setting would be:
#
# IMAP_EMPTYTRASH=Trash:7,Sent:30
#
# This would also delete messages from the Sent folder (presumably copies
# of sent mail) after 30 days.  This is a global setting that is applied to
# every mail account, and is probably useful in a controlled, corporate
# environment.
#
# Important: the purging is controlled by CTIME, not MTIME (the file time
# as shown by ls).  It is perfectly ordinary to see stuff in Trash that's
# a year old.  That's the file modification time, MTIME, that's displayed.
# This is generally when the message was originally delivered to this
# mailbox.  Purging is controlled by a different timestamp, CTIME, which is
# changed when the file is moved to the Trash folder (and at other times too).
#
# You might want to disable this setting in certain situations - it results
# in a stat() of every file in each folder, at login and logout.
#

IMAP_EMPTYTRASH=Trash:7

##NAME: IMAP_MOVE_EXPUNGE_TO_TRASH:0
#
# Set IMAP_MOVE_EXPUNGE_TO_TRASH to move expunged messages to Trash.  This
# effectively allows an undo of message deletion by fishing the deleted
# mail from trash.  Trash can be manually expunged as usually, and mail
# will get automatically expunged from Trash according to IMAP_EMPTYTRASH.
#
# NOTE: shared folders are still expunged as usual.  Shared folders are
# not affected.
#

IMAP_MOVE_EXPUNGE_TO_TRASH=0


##NAME: OUTBOX:0
#
# The next set of options deal with the "Outbox" enhancement.
# Uncomment the following setting to create a special folder, named
# INBOX.Outbox
#
# OUTBOX=.Outbox

##NAME: SENDMAIL:0
#
# If OUTBOX is defined, mail can be sent via the IMAP connection by copying
# a message to the INBOX.Outbox folder.  For all practical matters,
# INBOX.Outbox looks and behaves just like any other IMAP folder.  If this
# folder doesn't exist it must be created by the IMAP mail client, just
# like any other IMAP folder.  The kicker: any message copied or moved to
# this folder is will be E-mailed by the Courier-IMAP server, by running
# the SENDMAIL program.  Therefore, messages copied or moved to this
# folder must be well-formed RFC-2822 messages, with the recipient list
# specified in the To:, Cc:, and Bcc: headers.  Courier-IMAP relies on
# SENDMAIL to read the recipient list from these headers (and delete the Bcc:
# header) by running the command "$SENDMAIL -oi -t -f $SENDER", with the
# message piped on standard input.  $SENDER will be the return address
# of the message, which is set by the authentication module.
#
# DO NOT MODIFY SENDMAIL, below, unless you know what you're doing.
#

SENDMAIL=/usr/sbin/sendmail

##NAME: HEADERFROM:0
#
# For administrative and oversight purposes, the return address, $SENDER
# will also be saved in the X-IMAP-Sender mail header.  This header gets
# added to the sent E-mail (but it doesn't get saved in the copy of the
# message that's saved in the folder)
#
# WARNING - By enabling OUTBOX above, *every* IMAP mail client will receive
# the magic OUTBOX treatment.  Therefore advance LARTing is in order for
# _all_ of your lusers, until every one of them is aware of this.  Otherwise if
# OUTBOX is left at its default setting - a folder name that might be used
# accidentally - some people may be in for a rude surprise.  You can redefine
# the name of the magic folder by changing OUTBOX, above.  You should do that
# and pick a less-obvious name.  Perhaps brand it with your organizational
# name ( OUTBOX=.WidgetsAndSonsOutbox )

HEADERFROM=X-IMAP-Sender

##NAME: OUTBOX_MULTIPLE_SEND:0
#
# Remove the following comment to allow a COPY of more than one message to
# the Outbox, at a time.
#
# OUTBOX_MULTIPLE_SEND=1

##NAME: IMAPDSTART:0
#
# IMAPDSTART is not used directly.  Rather, this is a convenient flag to
# be read by your system startup ###### in /etc/rc.d, like this:
#
#  . /etc/courier/imapd
#
#  case x$IMAPDSTART in
#  x[yY]*)
#        /usr/lib/courier-imap/imapd.rc start
#        ;;
#  esac
#
# The default setting is going to be NO, so you'll have to manually flip
# it to yes.

IMAPDSTART=YES

##NAME: MAILDIRPATH:0
#
# MAILDIRPATH - directory name of the maildir directory.
#
MAILDIRPATH=Maildir
Контакти:  pecito
WEB  
Мнение #6 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Септември 26 2006, 17:22

Avatar




Група: Li psychos
Мнения: 380
Регистриран: Април 2005

Offline
а какво става като изпълниш
Код: 
/usr/lib/courier-imap/imapd.rc start


нещо по логовете ?

Стартирай
Код: 
SuSeconfig

ако не си още  :17;


Редактирано от gog на Септември 26 2006, 17:26

"Linux is for people who hate Windows, BSD is for people who love UNIX"
Контакти:  gog

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Мнение #7 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Септември 26 2006, 18:35
pecito

No avatar chosen




Група: Li fans
Мнения: 25
Регистриран: Август 2005

Оценка: няма

Offline
порта го оправих но проблема ми сега е че не намира виртуалните юсери
използвам postfix s ne local users

пуска ми някакви такива грешки

imapd: LOGIN FAILED,

fs postfix/virtual[17879]: 2D63FC67B: to=<fax@fs.example.com>, relay=virtual, delay=0, stat
us=bounced (unknown user: "fax@fs.example.com")
Контакти:  pecito
WEB  
Мнение #8 Skip to the next post in this topic.
Skip to the previous post in this topic. Написано на: Октомври 03 2006, 06:48
pecito

No avatar chosen




Група: Li fans
Мнения: 25
Регистриран: Август 2005

Оценка: няма

Offline
стигнах до задънена улица писмата стигат вътре във сървъра но не се разпределиат давами следната грешка:
Код: 

Oct  3 04:16:30 fs postfix/qmgr[25818]: E312FE08B: to=<email@example.com>, relay=none, delay=23322
, status=deferred (delivery temporarily suspended: connect to localhost.etrima.com[127.0.0.1]: Connection refu
sed)
Oct  3 04:16:30 fs postfix/qmgr[25818]: E00EFE1CB: to=<email@example.com>, relay=none, delay=10133
, status=deferred (delivery temporarily suspended: connect to localhost.etrima.com[127.0.0.1]: Connection refu
sed)
Oct  3 04:16:30 fs postfix/qmgr[25818]: 042F1CF85: to=<email@example.com>, relay=none, delay=32685
, status=deferred (delivery temporarily suspended: connect to localhost.etrima.com[127.0.0.1]: Connection refu
sed)

незнам какво да правя вече имам амавис но съм го изключил че той дава друга грешка ето ви целия posfix.main.cf моля ви помогнете
Код: 

readme_directory = /usr/share/doc/packages/postfix/README_FILES
mail_spool_directory = /var/spool/mail
canonical_maps = hash:/etc/postfix/canonical
virtual_maps = hash:/etc/postfix/virtual
virtual_mailbox_base = /home/mail
virtual_mailbox_maps = hash:/etc/postfix/virtual_mailbox
relocated_maps = hash:/etc/postfix/relocated
transport_maps = hash:/etc/postfix/transport
sender_canonical_maps = hash:/etc/postfix/sender_canonical
masquerade_exceptions = root
masquerade_classes = envelope_sender, header_sender, header_recipient
myhostname = example.com
#myhostname = localhost
mynetworks = 127.0.0.0/8, 192.168.0.0/24,10.8.109.0/24
#mynetworks = 127.0.0.0/8
program_directory = /usr/lib/postfix
inet_interfaces = all
#inet_interfaces = $myhostname, localhost
masquerade_domains =
mydestination = $myhostname, localhost.$mydomain, $transport_maps
#local_recipient_maps = unix:passwd.byname $alias_maps
local_recipient_maps =
defer_transports =
disable_dns_lookups = no
relayhost =
#### AMAVIS PIPE ########
#content_filter = amavis:[127.0.0.1]:10024
#receive_override_options = no_address_mappings
############################3
mailbox_command = /usr/bin/procmail
mailbox_transport = maildrop
#mailbox_transport = virtual
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_client_restrictions =
smtpd_helo_required = no
smtpd_helo_restrictions =
strict_rfc821_envelopes = no
smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination
smtp_sasl_auth_enable = no
smtpd_sasl_auth_enable = no
smtpd_use_tls = no
alias_maps = hash:/etc/aliases
mailbox_size_limit = 51200000
message_size_limit = 10240000
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000

Странното е че се връзван на локалхост на 25 порт а маила неиска даите идея какво може да е
Контакти:  pecito
WEB  
Мнение #9
Skip to the previous post in this topic. Написано на: Октомври 03 2006, 12:22

Avatar




Група: Li psychos
Мнения: 380
Регистриран: Април 2005

Offline
сигурен ли си че си спрял Amavis ?
ако си го пуснал "правилно" се правят промени и в master.cf
покажи го

"Linux is for people who hate Windows, BSD is for people who love UNIX"
Контакти:  gog

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo IM:
WEB  
Общо 8 отговор(а) от Септември 25 2006, 17:55 до сега
 » Начало » Li Форуми » Help & Support » Servers & Services » suse 10.1 - courier imap

© 2014 Linux Index Project
Powered by iF 1.0.0 © 2006 ikonForums